2003 May 16 5
Philips Semiconductors Product specification
Quad 2-input AND gate 74ALVC08
RECOMMENDED OPERATING CONDITIONS
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V).
Notes
1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. When V
CC
= 0 V (Power-down mode), the output voltage can be 3.6 V in normal operation.
3. For SO14 packages: above 70 °C derate linearly with 8 mW/K.
For TSSOP14 packages: above 60 °C derate linearly with 5.5 mW/K.
For DHVQFN14 packages: above 60 °C derate linearly with 4.5 mW/K.
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
V
CC
supply voltage 1.65 3.6 V
V
I
input voltage 0 3.6 V
V
O
output voltage V
CC
= 1.65 to 3.6 V 0 V
CC
V
V
CC
= 0 V; Power-down mode 0 3.6 V
T
amb
operating ambient temperature −40 +85 °C
t
r
,t
f
input rise and fall times V
CC
= 1.65 to 2.7 V 0 20 ns/V
V
CC
= 2.7 to 3.6 V 0 10 ns/V
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
V
CC
supply voltage −0.5 +4.6 V
I
IK
input diode current V
I
<0 −−50 mA
V
I
input voltage −0.5 +4.6 V
I
OK
output diode current V
O
>V
CC
or V
O
<0 −±50 mA
V
O
output voltage notes 1 and 2 −0.5 V
CC
+ 0.5 V
Power-down mode; note 2 −0.5 +4.6 V
I
O
output source or sink current V
O
=0toV
CC
−±50 mA
I
CC
, I
GND
V
CC
or GND current −±100 mA
T
stg
storage temperature −65 +150 °C
P
tot
power dissipation T
amb
= −40 to +85 °C; note 3 − 500 mW
