CF350-A48C
350 Watt High Density AC/DC Power Supply
CF350-A48C.A01 Page 1 of 4
Technical enquiries email: toronto@murata-ps.com, tel: +1 (866) 740 1232www.murata-ps.com
OBSOLETE PRODUCT
FEATURES
350W compact high density
Active load current share
Universal AC input with Power Factor
Correction
Ruggedized U-channel construction
RoHS compliant
Includes ORing diode for N+1 parallel
operation
International regulatory approvals
DESCRIPTION
The CF350-A48C switching power supply utilizes
advanced component and circuit technologies to
deliver one of the industry’s smallest 350 Watt
switchers. Built to meet 1U height considerations,
the U-Frame package measures only 6.80 x
3.86 x 1.40”. The CF350-A48C offers universal
AC input (85-265VAC) with active power factor
correction (PFC) and compliance to worldwide
safety and EMC standards.
SELECTION GUIDE
Model Number Power Output Main Output Standby Output
CF350-A48C 350W 48V 5V
INPUT CHARACTERISTICS
Parameter Conditions Min. Typ. Max. Units
Input Voltage Operating Range 85 264 Vac
Input Frequency 47 63 Hz
Turn-on Input Voltage Ramp up 83
Vac
Turn-off Input Voltage Ramp down 67
Maximum Rated Input Current 100Vac 2.8 Arms
Inrush Current Cold start at 25°C, 220Vac 60 Apk
Power Factor
230Vac, full load
96
%
115Vac, full load
99
OUTPUT VOLTAGE CHARACTERISTICS
Output
Voltage
Parameter Conditions Min. Typ. Max. Units
48V
Voltage Set Point Accuracy Factory pre-set at ±100mV 48 Vdc
Line Regulation For Vin (min) to Vin (max) ±0.4 %
Load Regulation
For load changes from zero
to full load
±1 %
Ripple Voltage & Noise
1
20MHz Bandwidth 250 mV p-p
Output Current 0 7.2
A
Peak Current 8
5Vsb
Voltage Set Point Accuracy 5 Vdc
Line Regulation For Vin (min) to Vin (max) ±0.4 %
Load Regulation ±2 %
Output Current 0 5 mA
Peak Current 5 mA
Ripple Voltage & Noise
1
20MHz Bandwidth 100 mV p-p
OUTPUT CHARACTERISTICS
Parameter Conditions Min. Typ. Max. Units
Remote Sense
48V output: Compensates for voltage drops of up to 0.5V between the power
supply to the load. Outputs are internally sensed at output connector if remote
sense lines are opened.
Effi ciency
230Vac, full load 87
%
115Vac, full load 83
Start-up Delay Output voltage at 90% 2.0 s
Rise Time 30 ms
Transient Load Response
For load change of 25% to 75%, at
slew rate of 1A/μs, recovery time less
than 2ms
±5 %
Current Sharing Accuracy
Single wire current share in a N+1
parallel redundant confi guration with
OR-ng diodes included in the PSU
±10 %
Hot Swap Available
Hold-up Time 110Vac, full load 16 ms
Overshoot and Undershoot Voltage change at turn-on and turn-off 1 %
1 Ripple and noise are measured with 10 μF, in parallel with 0.1 μF ceramic capacitors.