9703XYZ

(4)
Application Techniques (continued)
Temperature Performance
The electrical performance of 3M™ Electrically Conductive Adhesive Transfer Tape (ECATT) 9703 is more
sensitive to temperature than the peel performance. 3M ECATT 9703 is not recommended for high or low
temperature excursions where the electrical performance might be compromised, even if holding power is
not affected. The user is responsible for the temperature performance qualification of 3M ECATT 9703 in
their design. Contact your 3M Technical Service Representative for further information about the temperature
performance of 3M ECATT 9703.
Rework
Mechanically separate the parts using torque for rigid parts and peel for flexible ones. Remove the adhesive
by rubbing it off with a Scotch-Brite
®
Hand Pad, clean up the site and apply new adhesive. The force needed
to separate the parts and/or remove the adhesive can be reduced by softening the adhesive by heating 158°F
- 21F (70°C - 10C) or using solvents.*
*Note: When using solvents, be sure to follow the manufacturer’s precautions and directions for use
when handling such materials.
3M
Electrically Conductive Adhesive Transfer Tape 9703
General Information
3M ECATT 9703 is part of a family of anisotropic (Z-Axis) conductive tapes and thermoset films. For
applications where mechanical clamping is not desired, or where improved electrical, thermal and mechanical
performance is required, these alternative products should be considered.
Application Ideas
3M™ Electrically Conductive Adhesive Transfer Tape (ECATT) 9703 is ideal for interconnection of flexible
circuits with other flexible circuits (flex), rigid printed circuit boards (PCB) or LCD screens. Applications include
polyester flex circuit splicing, keyboard manufacturing, LCD assembly and many others. 3M ECATT 9703 is
also ideal for EMI/RFI shield and gasket attachment applications. Applications include EMI shields for displays
and gasket attachment to EMI/RFI cabinets and enclosures.
Regulatory: For regulatory information about this product, contact your 3M representative.
Technical Information: The technical information, recommendations and other statements contained in this document are based upon
tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.
Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance
of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user
is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s
method of application.
Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract,
negligence or strict liability.
3M is a trademark of 3M Company.
Scotch-Brite is a registered trademark of 3M Company.
DuPont and Kapton are trademarks of E. I. du Pont de
Nemours and Company or its aliates.
Please recycle.
©3M 2015. All rights reserved.
70-0709-3837-1
Electronics Materials Solutions Division
3M Center, Building 224-3N-11
St. Paul, MN 55144-1000
1-800-251-8634 phone
651-778-4244 fax
www.3M.com/electronics
(5)
Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product
packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships
the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED
WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does
not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the
purchase price.
3M
Electrically Conductive Adhesive Transfer Tape 9703
Safety Data Sheet: Consult Safety Data Sheet before use.
Certicate of Analysis (COA):
The 3M Certicate of Analysis (COA) for this product is established when the product becomes commercially
available from 3M. The Technical Data Sheet (TDS) technical information, test methods and data should be
considered representative or typical only and should not be used for specication purposes. The Technical
Data Sheet (TDS) information is based on a limited set of test results and do not reect the COA specication
limits. Final product specications and associated manufacturing facility testing methods used for the
commercialized product are outlined in the products Certicate of Analysis (COA) that is provided upon
request or with the products shipment.
The COA contains the 3M specications and test methods for the products performance limits that the
product will be supplied against. The 3M product is supplied to 3M COA test specications and the COA
test methods. Inquire with 3M for the COA for this product.
Storage and Shelf Life
The shelf life of 3M™ Electrically Conductive Adhesive Transfer Tape 9703 is 24 months from the shipment
date from the manufacturing location when stored in original packaging at 21°C (70°F) and 50% relative
humidity.

9703XYZ

Mfr. #:
Manufacturer:
3M
Description:
Adhesive Tapes 70006242864 9703 1/4 X 36 YD BULK
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet