TSOP381.., TSOP383.., TSOP385..
www.vishay.com
Vishay Semiconductors
Rev. 1.5, 22-Jul-16
1
Document Number: 81743
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IR Receiver Modules for Remote Control Systems
MECHANICAL DATA
Pinning for TSOP381.., TSOP383.., TSOP385..:
1 = OUT, 2 = GND, 3 = V
S
FEATURES
• Very low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Supply voltage: 2.5 V to 5.5 V
• Improved immunity against ambient light
• Insensitive to supply voltage ripple and noise
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
DESCRIPTION
These products are miniaturized receivers for infrared
remote control systems. A PIN diode and a preamplifier are
assembled on a lead frame, the epoxy package contains an
IR filter. The demodulated output signal can be directly
connected to a microprocessor for decoding.
The TSOP383.. series devices are optimized to suppress
almost all spurious pulses from energy saving lamps like
CFLs. AGC3 may also suppress some data signals if
continuously transmitted.
The TSOP381.. series are provided primarily for
compatibility with old AGC1 designs. New designs should
prefer the TSOP383.. series containing the newer AGC3.
The TSOP385.. series contain a very robust AGC5. This
series should only be used for critically noisy environments.
These components have not been qualified according to
automotive specifications.
PARTS TABLE
AGC
LEGACY, FOR SHORT BURST
REMOTE CONTROLS (AGC1)
NOISY ENVIRONMENTS AND
SHORT BURSTS (AGC3)
VERY NOISY ENVIRONMENTS
AND SHORT BURSTS (AGC5)
Carrier
frequency
30 kHz TSOP38130 TSOP38330 TSOP38530
33 kHz TSOP38133 TSOP38333 TSOP38533
36 kHz TSOP38136 TSOP38336
(1)(6)
TSOP38536
38 kHz TSOP38138 TSOP38338
(2)(3)(4)(5)
TSOP38538
40 kHz TSOP38140 TSOP38340 TSOP38540
56 kHz TSOP38156 TSOP38356 TSOP38556
Package Minicast
Pinning 1 = OUT, 2 = GND, 3 = V
S
Dimensions (mm) 5.0 W x 6.95 H x 4.8 D
Mounting Leaded
Application Remote control
Best remote control code
(1)
MCIR
(2)
Mitsubishi
(3)
RECS-80 Code
(4)
r-map
(5)
XMP-1, XMP-2
(6)
RCMM