For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved.
AV02-0452EN - March 19, 2012
Switching Speci cations (AC)
Over recommended operating T
A
= -40°C to 85°C, unless otherwise speci ed.
Parameter Sym. Min. Typ. Max. Units Conditions Note
Turn On Time T
ON
0.07 0.2 ms
I
F
=5mA, I
O
=50mA, T
A
=25C
0.5 ms I
F
=5mA, I
O
=50mA
0.15 0.5 ms
I
F
=2mA, I
O
=50mA, T
A
=25C
0.8 ms I
F
=2mA, I
O
=50mA
Turn O Time T
OFF
0.07 0.2 ms
I
F
=5mA, I
O
=50mA, T
A
=25C
0.5 ms I
F
=5mA, I
O
=50mA
0.07 0.2 ms
I
F
=2mA, I
O
=50mA, T
A
=25C
0.5 ms I
F
=2mA, I
O
=50mA
Output Transient
Rejection
dV
O
/dt 1 7
kV/s V
O
=250V, T
A
=25C
Input-Output
Transient Rejection
dV
I-O
/dt 1
10 kV/s V
I-O
=1000V, T
A
=25C
Notes:
1. For quali ed device performance over temperature range, it is recommended to operate at I
F
=5mA.
2. Device is considered as a two terminal device: pins 1, 2, 3 and 4 shorted together and pins 5, 6, 7 and 8 shorted together.
3. The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous
voltage rating. For the continuous voltage rating refer to the IEC/EN/DIN EN 60747-5-2 Insulation Characteristics Table (if applicable), your
equipment level safety speci cation, or Avago Technologies Application Note 1074, “Optocoupler Input-Output Endurance Voltage.”
4. The PCB design and environmental conditions are taken into consideration when measuring the I
O(OFF)
performance.
5. During the pulsed R
(ON)
measurement ( I
O
duration 30ms), ambient (T
A
) and case temperature (T
C
) are equal.
