Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level L
W
A ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level L
p
A measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Humidity protection
- Degree of protection: IP 54
Max. 444 m
3
/h
– Material: Scroll housing: GRP
1)
Impeller: GRP
1)
Base plate: Sheet steel
– Direction of air flow: Axial: Intake,
Centrifugal: Exhaust
– Connection: Via single wires AWG 22, TR 64
48 V model: Flat plug
6.3 x 0.8 mm for ground
conductor
– Highlights: Smoothly operating 3-phase
fan drive
Backward-curved impeller
– Weight: 1.4 kg
1) Fiberglass-reinforced plastic
Type m
3
/h cfm VDC VDC Bel(A) / Watts rpm
-1
°C Hours Hours
RG 160-28/14 NTD...
59 34.7
24
16...28
— 2.0 800
-20...+60 55 000 / 35 000 92 500
¿
308 181 7.5 64 4 200
¡
RG 160-28/14 NTD 308 181 24 16...28 7.5 64 4 200 -20...+60 55 000 / 35 000 92 500 ¡
RG 160-28/14 NTDH 370 218 24 16...28 7.8 101 5 000 -20...+60 50 000 / 32 500 85 000 ¬
RG 160-28/18 NTD...
59 34.7
48
38...57
— 2.0 800
-20...+70 55 000 / 27 500 92 500
¿
308 181 7.5 59 4 200
¡
RG 160-28/18 N/2 TDHHP
* 444 261 48 36...60 8.5 159 6 000 -20...+65 40 000 / 22 500 67 500 √
Subject to change
Nominal voltage
Air flow
Air flow
Voltage range
Sound power level
Sintec sleeve bearings
Ball bearings
Power consumption
Nominal speed
Temperature range
Service life L
10
(40 °C)
ebm-papst standard
Service life L
10
(T
max
)
ebm-papst standard
Life expectancy L
10IPC
(40 °C) see page 17
Curve
Models RG 160-28/14 NTD... and RG 160-28/18 NTD... are available in customer-specific, custom-developed variants only.
The figures indicated are technically feasible benchmark values.
The fans can be specially adapted to your application with signal outputs and control inputs.
*The specific service life is valid when an external capacitor is wired between the positive and negative wires.
Please note the wiring suggestion.
Min.
Max.
Min.
Max.
Tin-plated
105
2016-01
Information
DC axial fansDC fans - specials
ACmaxx / EC fans
AC axial fans
Accessories
Representatives
DC centrifugal fansAC centrifugal fans
m
3
c V V B / W r ° H H
DC centrifugal fans
220 x 56 mm
Series RG 160 NTD
Nominal data
