E3S
E3S
10
E39-L2 Mounting Bracket
Applicable
Photoelectric Sensors:
E3S-5E41, E3S-R2E41,
E3S-DS30E41
E39-L4 Mounting Bracket
Applicable
Photoelectric Sensors:
E3S-2E41, E3S-DS10E41
E39-G1 Sensitivity Adjuster Knob
This
accessory is attached to the following models:
E3S-5E4(41), E3S-DS30E4(41), E3S-R2E4(41),
E3S-LS10XE4, E3S-LS20XE4, E3S-GS1E4, E3S-GS3E4
Note: This adjuster cannot be used with Models
E3S-2DE4(41)
and E3S-DS10E4(41).
Two, M4 slotted
hexagonal bolts
9.3 dia.
13 dia.
Two, M3
screws
E39-S1 Slit
Applicable
Photoelectric Sensors:
E3S-5E4, E3S-5E41 (see note 3)
Note: 1.
Model E39-S2 can have any of four different dimensions:
1
1 x 0.5 mm, 1
1 x 1 mm, 1
1 x 2 mm, and 1
1 x 4 mm.
2. T
wo slits (one for the emitter and the other for the receiver) are used in pairs.
3.
Dimensions in parentheses are without the Spacer
.
Use the Spacer with the E3S-2E4(41) as shown above to prevent the supporter
and
mounting bracket from touching each other when the optical axis is
adjusted.
The Spacer is not usually necessary with the E3S-5E4(41) unless the
E3S-2E4(41)
and E3S-5E4(41) are directly mounted together
.
E39-S1
Spacer
