XA-Z14-CE1P-W

RELATED PRODUCTS
APPLICATION EXAMPLEBENEFITS
Hardened design with extended operating temperature
(-35° C to +74° C) for hazardous locations
Class 1, Division 2 certified
Multi-master/Multi-protocol concurrent support for
Allen-Bradley and Modbus protocols
Serial and Ethernet protocol bridging support for Allen-
Bradley and Modbus protocols promotes interoperability
ASCII to protocol translation for Allen-Bradley
and Modbus
Switch selectable RS-232/422/485 serial port
Gateways Network
Extenders
Modules Development
Kits
Easy-to-use adapters bring wireless connectivity to
electronic devices in legacy wired applications
XBee-PRO ZigBee adapters deliver wireless connectivity to
electronic devices through advanced mesh networks. These
adapters utilize the ZigBee PRO Feature Set, for robust self-
healing, self-configuring networks. They are ideal for wirelessly
enabling sensors, controllers and other devices in legacy
wired applications, or where a common hardware interface is
preferable.
XBee-PRO ZigBee adapters can be battery or mains
powered. They are available in a wide range of physical
interfaces, including RS-232, RS-485, USB (power harvesting),
digital I/O and analog I/O. Built upon XBee-PRO modules,
XBEE-PRO
®
ZIGBEE ADAPTERS
these adapters can be purchased in a broad range of
configurations and customized to meet your application
needs.
XBee adapters are compatible with ConnectPort® X gateways,
XBee® modules and XBee accessories. This family of
hardware, soware and management tools provides users
with unparalleled flexibility and end-to-end communication
between devices.
ZIGBEE ADAPTERS FOR
SERIAL AND USB DEVICES
Sensors
XBEE-PRO®
ZIGBEE ADAPTER
Lighting
Ballast and
Occupancy
Sensor
Wireless/Telco/VPN
DEVICE CLOUD
CONNECTPORT® X
GATEWAY
Ethernet
CENTRAL FACILITIES
MANAGEMENT
Zone
Lighting
Entry ID Fob
Reader
Zone
Lighting
XBEE®
SENSOR
WPAN
SPECIFICATIONS
WWW.DIGI.COM
Back
USB MODEL
USB
InterfaceTop
Back
Power
Top
RS-232, RS-485, ANALOG, DIGITAL I/O MODELS
Interface Options
RS-485, Analog, Digital I/O
6-position Wire
DB-9M
Serial
RS-232
XBee-PRO® ZigBee Adapter
PERFORMANCE
RF DATA RATE
250 kbps
INDOOR/URBAN RANGE
Up to 300  (90 m) / 200  (60 m) Int’l variant
OUTDOOR/RF LINE-OF-SIGHT RANGE
Up to 2 miles (3200m) / 5000  (1500 m) Int’l variant
TRANSMIT POWER
63 mW (+18 dBm) / Int’l version
RECEIVER SENSITIVITY (1% PER)
-102 dBm
FEATURES
ANTENNA TYPE
XBee ZB Adapters: Internal Antenna; XBee-PRO ZB Adapters: External RPSMA Antenna
FREQUENCY BAND
2.4 GHz
SERIAL DATA INTERFACE
RS-232 DB9M/DTE or RS-485 (6-position wire terminal block) switch selectable between RS-422 half-duplex,
RS-422 full duplex and RS-485
USB DATA INTERFACE
USB 2.0 Full Speed (with ESD protection); connects to host via captive 1-meter cable
ANALOG IO (AIO) & DIGITAL IO (DIO)
6-position wire terminal block; Analog IO: 0 - 10V, 4 - 20 mA, or +/- 2VDC Dierential; Digital IO: Digital Input or sinking driver output
NETWORKING & SECURITY
NETWORK TOPOLOGIES
Point-to-point, Point-to-multipoint, Mesh
NUMBER OF CHANNELS
14
SPREAD SPECTRUM TYPE
Direct Sequence Spread Spectrum
FILTRATION OPTIONS
PAN ID, 64-bit MAC, channel
ADDRESSING
65,000 available addresses for each channel
OTHER
LEDS
Power: Glows green when external power is supplied (not active when battery powered to limit power drain)
Associate: Blinks when unit is connected and associated on an RF network
CONTROLS
Device reset (internal push button); Identification (internal push button) – relays ID to gateway
DIMENSIONS (L X W X H) & WEIGHT
RS-232, RS-485, AIO, DIO models: 3.60 in x 1.90 in x 1.20 in (9.14 cm x 4.82 cm x 3.04 cm) 2.29 oz (64.92 g)
USB models: 2.87 in x 1.80 in x 0.83 in (7.29 cm x 4.57 cm x 2.10 cm) 1.60 oz (45.36 g)
OPERATING TEMPERATURE
-40° C to +70° C
POWER REQUIREMENTS
INPUT VOLTAGE
RS-232, RS-485, AIO, DIO models: 3.7-6VDC and 9-30 VDC
USB models: Bus powered (+5V) USB Models: Bus Powered (+5V)
POWER CONSUMPTION
USB: 70 mA Rx and 250 mA Tx (normal operation) / 200 uA (suspend mode)
REGULATORY APPROVALS
EMISSIONS
FCC Part 15.247, IC, ETSI/CE, Telec, EN55022 (Class B)
SAFETY
UL60950, CAN/CSA C22.2 No.60950
ROHS
Yes
DIGI INTERNATIONAL WORLDWIDE HQ
877-912-3444 / 952-912-3444 / www.digi.com
DIGI INTERNATIONAL FRANCE
+33-1-55-61-98-98 / www.digi.fr
DIGI INTERNATIONAL JAPAN
+81-3-5428-0261 / www.digi-intl.co.jp
DIGI INTERNATIONAL SINGAPORE
+65-6213-5380
DIGI INTERNATIONAL CHINA
+86-21-50492199 / www.digi.com.cn
DIGI SERVICE AND SUPPORT / You can purchase with confidence knowing that Digi
is always available to serve you with expert technical support and our industry
leading warranty. For detailed information visit www.digi.com/support.
© 1996-2015 Digi International Inc. All rights reserved.
All trademarks are the property of their respective owners.
PART NUMBERS
FOR MORE INFORMATION
PLEASE VISIT WWW.DIGI.COM
DESCRIPTION
XA-Z14-CE1P-A XBee-PRO ZB USB adapter, internal wire antenna
XA-Z14-CE1P-W XBee-PRO ZB USB adapter, internal wire antenna (International)
XA-Z14-CS2PH-A XBee-PRO RS-232 adapter, external RPSMA antenna included (9 - 30V)
XA-Z14-CS2PH-W XBee-PRO RS-232 adapter, external RPSMA antenna included (9 - 30V) (International)
XA-Z14-CS3PH-A XBee-PRO RS-485 adapter, external RPSMA antenna included (9 - 30V)
XA-Z14-CS3PH-W XBee-PRO RS-485 adapter, external RPSMA antenna included (9 - 30V) (International)
XA-Z14-CS4PH-A XBee-PRO DIO adapter, external RPSMA antenna included (9 - 30V)
XA-Z14-CS4PH-W XBee-PRO DIO adapter, external RPSMA antenna included (9 - 30V) (International)
XA-Z14-CS5PH-A XBee-PRO AIO adapter, external RPSMA antenna included (9 - 30V)
XA-Z14-CS5PH-W XBee-PRO AIO adapter, external RPSMA antenna included (9 - 30V) (International)
91001420
E1/915

XA-Z14-CE1P-W

Mfr. #:
Manufacturer:
Digi International
Description:
Zigbee Modules (802.15.4) Xbee USB Adptr w/ Int Wire Ant
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union