OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

EVP-BD6C1A000

P1-P3
Light Touch Switches/EVPBD
1 2 345678910 11 12
Product Code Type Operating Force
Note: Non washable
■ Specifications
Type Snap action/Push-on type SPST
Electrical
Rating
Contact Resistance 500 mΩ max.
Insulation Resistance 100 MΩ min. (at 100 V DC)
Dielectric Withstanding Voltage 250 V AC for 1 minute
Bouncing 10 ms max. (ON, OFF)
Mechanical
Operating Force 3.5 N
Travel 0.75 mm
Endurance Operating Life 100,000 cycles min.
Operating Temperature –40 °C to +90 °C
Storage Temperature
–40 °C to +90 °C (Bulk)
–20 °C to +60 °C (Taping)
Minimum Quantity/Packing Unit 2,000 pcs. Embossed Taping (Reel Pack)
Quantity/Carton 1
0,000 pcs.
■ Features
● External dimensions : 6.0mm
×
6.0mm,Height4.0mm
● Sharpfeelingandsilentbymetaldomeandrubberdome
■ Explanation of Part Numbers
6 mm Square Middle Travel 2 terminals SMD
Light Touch Switches
Type:
EVPBD
■ Recommended Applications
● Operating switches for car electronic equipment,
car audio systems, etc.
● Steering switches
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
ANCTB40E 201703-Fd
 
Panasonic Corporation 2017
–1–
industrial.panasonic.com/ac/e/
201 7.03
AC 000
Product Height
10 μA 2 V DC to 20 mA 15 V DC (Resistive load)
201703ANCTB_E.indb 1 17/03/01 17:45
Light Touch Switches/EVPBD
8
4
2- 2
7±0.3
1±0.3
6±0.1
6±0.1
1.4
φ3
AB
A
B
4
2.5
（5）
General dimension tolerance : ± 0.2
( )dimensions are reference dimensions.
Circuit diagram
Land pattern plan
Soldering thicknes t=0.15±0.03
Part Numbers Operating Force Height Operating Life
EVPBD6C1A000 3.5 N
4.0
mm 100,000 cycles
■ Dimensions in mm (not to scale)
EVPBD
(
Embossed Taping)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Panasonic Corporation
Electromechanical Control Business Division
–2–
industrial.panasonic.com/ac/e/
ANCTB40E 201703-Fd
 
Panasonic Corporation 2017
201703ANCTB_E.indb 2 17/03/01 17:45
Light Touch Switches/EVPBD
Soldering Time (s)
Reflow temperature may vary by location even in the same reflow condition.
Please check the reflow temperature at terminals and at the top of a switch
to make sure the both temperatures are withiin the specification.
If even one of them is out of the specifi cations, please adjust.
(Normal Temp.)
Fan or Normal Temp.
180
Operation Top (°C)
260
MAX.
150
90±30
40±10
230
φG
DH
E
C
A
B
I
J
t
F
Tape width=12.0 mm (A=12.0 mm)
Taping condition : Lack of products in the middle of taping should be
one MAX, but total quantity specified in the
specifications should be secured.
Peeling off strength of top tape : It should be within 0.2N to 1.0N at
165 degree in peeling off angle.
Joint of carrier tape : One joint per one reel may exist.
Tape running direction
● Embossed Carrier Taping
■ Recommended Reflow Soldering Conditions
Unit: mm
Part No.HeightABCDEFGH I J t
EVPBD 4.0 12.0±0.3 1.75±0.10 5.5±0.1 8.0±0.1 4.0±0.1 2.0±0.1 1.5
+0.1
6.3±0.2 7.5±0.2 4.25±0.20 0.4±0.1
-0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Panasonic Corporation
Electromechanical Control Business Division
–3–
industrial.panasonic.com/ac/e/
ANCTB40E 201703-Fd
 
Panasonic Corporation 2017
201703ANCTB_E.indb 3 17/03/01 17:45
P1-P3

EVP-BD6C1A000

Mfr. #:
Buy EVP-BD6C1A000
Manufacturer:
Panasonic
Description:
Tactile Switches 6.0x6.0x4mm 3.5N w/2 Term .25mm Trvl IP67
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet