For further information contact your local STMicroelectronics sales office.
June 2013 DocID024760 Rev 1 1/4
STEVAL-CCA036V1
Demonstration board for single channel op-amp in SO8 package
Data brief
Features
• This demonstration board with its components
allow it to be configured as:
– Low-pass Sallen-Key circuit
– High-pass Sallen-Key circuit
– Differential amplifier
– AC-coupled circuit
– In-loop compensation circuit
– Out-of-loop compensation circuit
– Numerous other possible configurations
not described here
• RoHS compliant
Description
The STEVAL-CCA036V1 demonstration board is
designed to help characterize single operational
amplifiers in SO8 packages.
With this board, the most common op-amp based
circuits can be achieved.
The board is designed for surface-mounted
components and can be used to perform onboard
characterization prior to the integration of
STMicroelectronics’ products in your designs.
Resistor and capacitor footprints are implemented
for the 0805 series. A set of two decoupling
capacitors have been implemented on both power
supply pins so as to benefit from the maximum
performances of ST products. In order to reject a
wide range of frequencies, 10 nF and 4.7 µF are
good values for these capacitors.
www.st.com
