PVR1300

OBSOLETE
Data Sheet No. PD 10027D
Series PVR13
Microelectronic Power IC
BOSFET
®
Photovoltaic Relay
Dual-Pole, 400mA, 0-100V AC/DC
General Description
The PVR13 Photovoltaic Relay is a dual-pole, normally
open solid state replacement for electro-mechanical
relays. It utilizes as an output switch a unique
bidirectional (AC or DC) MOSFET power IC termed
a BOSFET. The BOSFET is controlled by a photo-
voltaic generator of novel construction, which is
energized by radiation from a dielectrically isolated
light emitting diode (LED).
The PVR overcomes the limitations of reed relays by
offering the solid state advantages of long life, high
operating speed, low pick-up power, bounce-free
operation, low thermal voltages and miniaturization.
These advantages allow product improvement and
design innovations in many applications such as
process control, multiplexing, telecommunications,
automatic test equipment and data acquisition.
The PVR can switch analog signals from thermo-
couple level to 100 volts peak AC or DC polarity.
Signal frequencies into the RF range are easily
controlled and switching rates up to 5kHz are achiev-
able. The extremely small thermally generated offset
voltages allow increased measurement accuracies.
Unique silicon technology developed by International
Rectifier forms the heart of the PVR. The monolithic
BOSFET contains a bidirectional N-channel power
MOSFET output structure. In addition, this power IC
chip has input circuitry for fast turn-off and gate
protection functions. This section of the BOSFET chip
utilizes both bipolar and MOS technology to form
NPN transistors, P-channel MOSFETs, resistors,
diodes and capacitors.
The photovoltaic generator similarly utilizes a unique
International Rectifier alloyed multijunction structure.
The excellent current conversion efficiency of this
technique results in the very fast response of the
PVR microelectronic power IC relay.
This advanced semiconductor technology has cre-
ated a radically new control device. Designers can
now develop switching systems to new standards of
electrical performance and mechanical compactness.
Features
BOSFET Power IC n
10
10
Operations n
300µsec Operating Time n
0.2µVolt Thermal Offset n
5 milliwatts Pick-Up Power n
1000V/µsec dv/dt n
Bounce-Free n
16-pin DIP Package n
-40°C to 85°C n
Part Identification
Part Number Operating Off-State
Voltage (AC/DC) Resistance
PVR1300 10
8
Ohms
0 – 100V
PVR1301 10
10
Ohms
(BOSFET is a trademark of International Rectifier)
Replaced by PVR13N
Series PVR13
2
Replaced by PVR13N
OBSOLETE
OUTPUT CHARACTERISTICS A Connection C Connection Units
Operating Voltage Range ±100 100 V
(peak)
Maxiumum Load Current 40°C (see figure 1) 400 700 mA(DC)
Response Time @25°C (see figure 7)
Maximum T
(on)
@ 12mA Control, 100 mA Load, 100 V
DC
300 µs
Maximum T
(off)
@ 12mA Control, 100 mA Load, 100 V
DC
50 µs
Max. On-state Resistance 25°C (Pulsed) (figure 2) 100 mA Load, 12mA Control 5.0 1.5
Minimum Off-state Resistance 25°C @ 80 V
DC
PVR1300 10
8
PVR1301 10
10
Maximum Thermal Offset Voltage @ 5.0mA Control 0.2 µvolts
Minimum Off-State dv/dt 1000 V/µs
Output Capacitance (see figure 10) 20 40 pF @ 20VDC
GENERAL CHARACTERISTICS (PVR1300 and PVR1301) Units
Dielectric Strength: Input-Output 1500 V
RMS
Insulation Resistance: Input-Output @ 500V
DC
10
12
@ 25°C - 50% RH
Maximum Capacitance: Input-Output 1.0 pF
Lead Temperature (1.6mm below seating plane for 10 seconds) 260 °C
Ambient Temperature Range: Operating -40 to +85 °C
Storage -40 to +100
INPUT CHARACTERISTICS A Connection C Connection Units
Minimum Control Current (see figure 1) DC
For 100mA Continuous Load Current 1 1 mA@25°C
For 400mA Continuous Load Current 10 5 mA@25°C
For 100mA Continuous Load Current 10 7 mA@85°C
Minimum Turn-Off Current 10 µA(DC)
Minimum Turn-Off Voltage 0.6 V(DC)
Control Current Range (Caution: current limit input LED. See figure 6) 2.0 to 25 mA(DC)
Maximum Reverse Voltage 7.0 V(DC)
Electrical Specifications (-40°C T
A
+85°C unless otherwise specified)
Series PVR13
3
Replaced by PVR13N
OBSOLETE
Max. Load Current (mA)
Figure 1. Current Derating Curves Figure 2. Typical On-Resistance
Figure 3.Typical On Characteristics
(A Connection)
Figure 4. Typical On-Characteristics
(C Connection)
On-State Resistance ()
Ambient Temperature (°C)
V
DD
(Volts)
Load Current (mA)
V
DS
(Volts)
Load Current (mA)
Ambient Temperature (°C)

PVR1300

Mfr. #:
Manufacturer:
Infineon Technologies
Description:
SSR RELAY DPST-NO 400MA 0-100V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet