DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
DO NOT
SCALE FROM
THIS PRINT
SAL1-1XX-XX-XX-S-A-XX
No OF POSITIONS
-20, -27, -30, & -40
ROW SPECIFICATION
-S: SINGLE (USE SAL1-XX-S-A)
LEAD STYLE
-01:
(USE C-192-03-XX)
PLATING SPECIFICATION
-S: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL.
(USE C-192-03-S & WT-20-01-T)
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL.
(USE C-192-03-H & WT-20-01-T)
-SM: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL.
(USE C-192-03-S & WT-20-01-TM)
ALIGNMENT PIN
OPTIONS
-TR: TAPE & REEL (SEE FIG 3, SHT 2)
(REQUIRED FOR NEW CUSTOMERS)
-K: KAPTON PAD
(SEE FIG 2, SHT 2)
6.15 .242
REF
3.10 .122
REF
(No OF POS x 1.000[.0394] + 3.80[.1496] REF
(No OF POS x 1.00[.039] + 8.60[.339]
0.25
REF
.010
1.90
REF
.075
0.40 .016
(No OF POS x 1.000[.0394] + 7.800[.3071] REF
3.15 .124
REF
(No OF POS x 1.000[.0394] + 1.500[.0591] REF
5.45 .215
REF
1.50
REF
.059
2.02±0.08 .080±.003
(No OF POS -1) x 1.0000[.03937]
1.000 .0394
2
MAX SWAY
(TYP)
C
WT-20-01-XX
0.58
-
0.08
+
0.13
.023
-
.003
+
.005
2.10 .083
REF
2.54
±0.25
.100
±.010
'A'
SAL1-XX-S-A
C-192-03-XX
C
(SEE NOTE 6)
C
0.10[.004]
.08[.003]
(No OF POS x 1.000[.0394] + 5.400[.2126] REF
1.20
REF
.047
0.23
REF
.009
2.75
REF
.108
3.67
REF
.145
2.20 .087
10.09
0.00
+
0.10
.397
-
.000
+
.004
116°
-
0°
+
3°
R
0.51 .020
C
C
CARRIER
IN-PROCESS
0.010±0.051
.0004±.002
(SEE NOTE 7)
DETAIL 'A'
SCALE 50 : 1
C
FIG 1
SAL1-127-01-XX-S-A SHOWN
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS ANGLES
.X:
.3 [.01 2
.XX:
.13 [.005]
.XXX:
.051 [.0020]
MATERIAL:
1MM SERIAL ATA LINK CONNECTOR
BY:
SAL1-1XX-XX-XX-S-A-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
09-23-2010
2
1
SHEET SCALE: 2.5:1
INSULATOR: LCP, COLOR: BLACK
CONTACT: BeCu
F:\DWG\MISC\MKTG\SAL1-1XX-XX-XX-S-A-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: .038[.0015] MAX.
3. MINIMUM PUSHOUT FORCE , CONTACTS, AND WELD TABS: .5 LB.
4. MAXIMUM ALLOWABLE BOW: .05[.002] INCH/INCH AFTER ASSEMBLY.
5. PARTS TO BE PACKAGED IN TUBES.
6. INCLUDES CONTACTS AND WELD TABS.
7. DIMENSION APPLIES FROM LINE FORMED BY BODY TO BOTH THE WELD
TAB AND THE SOLDER TAIL. WELD TAB AND SOLDER TAIL MAY BE ABOVE
OR BELOW LINE FORMED BY BODY.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION AB
