FREQUENCY DIVIDERS & DETECTORS - SMT
6
6 - 48
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Evaluation PCB
List of Materials for Evaluation PCB 104631
[1]
The circuit board used in the nal application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and backside ground slug should be
connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available
from Hittite upon request. This evaluation board is
designed for single ended input testing. J2 and J3
provide differential output signals.
Item Description
J1 - J3 PCB Mount SMA RF Connector
C1 - C4 100 pF Capacitor, 0402 Pkg.
C5 1000 pF Capacitor, 0603 Pkg.
C6 10 μF Tantalum Capacitor
U1 HMC365S8G / HMC365S8GE Divide-by-4
PCB
[2]
104627 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
HMC365S8G / 365S8GE
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 13 GHz
v04.0506
