10© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com P0102_ASB • 4/6/2016
Multilayer Piezoelectric Actuators – ASB Series Metal Sealed 85°C
Precautions cont’d
Standard Quality Level: Computers, ofce automation equipment, communication equipment, measuring instruments, AV
equipment, household electrical appliances, machine tools, personal equipment and industrial robots.
Special Quality Level: Transportation equipment (automobiles, railways, shipping), trafc signals, disaster prevention/crime
prevention systems, a variety of safety devices and medical equipment which are not directly intended for life-support purposes.
Custom Quality Level: Equipment for airplanes, aerospace equipment, nuclear power control systems, medical equipment
and apparatus or systems for life-support purposes.
Unless otherwise specied, the quality level of KEMET’s electronic component products shown in documents such as catalogs,
datasheets or technical books are the standard quality level.
Precautions to be taken when using Multilayer Piezoelectric Actuators
(Please read these precautions before using our products)
1. Before using or designing a system using our products, read the precautions and specications (such as level of quality) for the
products you intend to use.
2. The main failures with multilayer piezeoelectric actuators are deterioration of insulation resistance, short-circuit, and open-circuit.
Before using the products, design systems carefully to ensure redundancy, prevention of the spread of re, and prevention of faulty
operation allowing for the occurrence of failures.
3. Use the products after checking the working conditions and rated performance of each multilayer piezoelectric actuator series.
Selection of AE series (resin coated type) or ASB series (metal sealed type) should be based on the intended working temperature
and humidity.
3. This manual is subject to change without notice. The content of this manual is based on data which is correct as of December,
2014 and they may be changed without notice. If our products are used for mass-production design, please consult with a member
of our company’s sales staff.
4. Reprinting and copying of this manual without prior written permission from KEMET Electronics Corporation is not permitted.
5. In the event of any problems associated with industrial property of a third party arising as a result of the use of our products,
KEMET assumes no responsibility for problems other than directly associated with the constitution and manufacturing methods of
the product.
6. Should any of these products come under the category of strategic goods or services (according to Japan’s foreign trade and
foreign exchange regulations), the sender must obtain an export license from the Japanese Government before said products can
be exported outside Japan.