TMC424 Datasheet TMC424 | P19-P21

TMC424 Datasheet – (V1.04 / 2015-JUL-01) 19/21

9 Package dimensions

Figure 13: 100-Pin TQFP Top View

Attention: Pin 1 marking is by dot only. The position of the chamfered corner may vary!

Figure 14: 100-Pin TQFP Side View

Figure 15: 100-Pin TQFP Side View Detail A

TMC424 Datasheet – (V1.04 / 2015-JUL-01) 20/21

JEDEC

Equivalent

TQFP100

MS-026 VAR BED

Dimension

Min

Nom

Max

A

A1

A2

b

c

D/E

D1/E1

0.05

1.35

0.17

0.09

1.40

0.22

16.00 BSC

14.00 BSC

1.60

0.15

1.45

0.27

0.20

e

0.50 BSC

L

0.45

0.60

0.75

ccc

0.08

Theta

0

3.50 deg

7 deg

Table 13: TQFP Dimensions

Notes :

- all dimensions are in millimeters

- BSC Basic Spacing between Centers

TMC424 Datasheet – (V1.04 / 2015-JUL-01) 21/21

Life support policy

TRINAMIC Motion Control GmbH & Co. KG does not

authorize or warrant any of its products for use in life

support systems, without the specific written consent

of TRINAMIC Motion Control GmbH & Co. KG. Life

support systems are equipment intended to support

or sustain life, and whose failure to perform, when

properly used in accordance with instructions provided,

can be reasonably expected to result in personal injury

or death.

Information given in this data sheet is believed to

be accurate and reliable. However no

responsibility is assumed for the consequences

of its use nor for any infringement of patents or

other rights of third parties, which may result form

its use.

Specifications subject to change without notice.

TMC424

TMC424

Products related to this Datasheet