MBR7xx, MBRF7xx, MBRB7xx
www.vishay.com
Vishay General Semiconductor
Revision: 20-Nov-15
1
Document Number: 88680
For technical questions within your region: DiodesAmericas@vishay.com
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Schottky Barrier Rectifier
FEATURES
• Power pack
• Guardring for overvoltage protection
• Low power loss, high efficiency
• Low forward voltage drop
• High forward surge capability
• High frequency operation
• Meets MSL level 1, per J-STD-020, LF maximum peak of
245 °C (for TO-263AB package)
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AC and ITO-220AC package)
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3_A
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in low voltage, high frequency rectifier of switching
mode power supplies, freewheeling diodes, DC/DC
converters, and polarity protection application.
MECHANICAL DATA
Case: TO-220AC, ITO-220AC, TO-263AB
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified
(“_X” denotes revision code, e.g. A, B, ...)
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: as marked
Mounting Torque: 10 in-lbs maximum
PRIMARY CHARACTERISTICS
I
F(AV)
7.5 A
V
RRM
35 V to 60 V
I
FSM
150 A
V
F
0.57 V, 0.65 V
T
J
max. 150 °C
Package TO-220AC, ITO-220AC, TO-263AB
Diode variations Single
CASE
PIN 2
PIN 1
TO-220AC
MBR7xx
ITO-220AC
MBRF7xx
MBRB7xx
PIN 1
PIN 2
K
HEATSINK
1
2
1
2
K
PIN 2
PIN 1
TO-263AB
1
2
MAXIMUM RATINGS (T
C
= 25 °C unless otherwise noted)
PARAMETER SYMBOL MBR735 MBR745 MBR750 MBR760 UNIT
Maximum repetitive peak reverse voltage V
RRM
35 45 50 60
VWorking peak reverse voltage V
RWM
35 45 50 60
Maximum DC blocking voltage V
DC
35 45 50 60
Maximum average forward rectified current (fig. 1) I
F(AV)
7.5
A
Peak forward surge current 8.3 ms single half sine-wave superimposed
on rated load
I
FSM
150
Peak repetitive reverse surge current at t
p
= 2.0 μs, 1 kHz I
RRM
1.0 0.5
Voltage rate of change (rated V
R
) dV/dt 10 000
Operating junction temperature range T
J
-65 to +150
°C
Operating storage temperature range T
STG
-65 to +175
Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min V
AC
1500 V