OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

DLFL-0147-35C5

P1-P3
1
Suppression Chokes
DLFL
https://www.schurter.com /PG81_82
EMC Products
Linear/Saturating Choke
Approvals and Compliances
Description
- Linear/saturating choke
- THT-terminals
- Low noise development by using iron powder toroids instead of con-
ventional iron lamination cores
- Flange for mounting onto printed circuit board
- Fully potted resign
Applications
- Phase angle control circuits with thyristors, triacs or transistors
- The choke acts at its optimum when it is mounted directly at the inter-
ference originator (thyristor, triac)
Weblinks
pdf datasheet, html-datasheet, General Product Information, Distributor-
Stock-Check, Detailed request for product
Technical Data
Rated voltage up to 440 VAC
Rated Current 5 - 45 A @ Ta 45 °C
Power Operating Frequency 50 Hz
Terminal Type THT, Flexible wire
Weight 144 - 1423 g
Material: Housing UL 94V-0
Sealing Compound UL 94V-0
Isolation Voltage 2 kV eff., winding to ambient
Climatic Category 25/100/21 acc. to IEC 60068-1
Allowable Operation Temp. -25 °C to 100 °C
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information
technologyequipment.
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS SCHURTER AG EU Directive RoHS 2011/65/EU
China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
2
Suppression Chokes
DLFL
https://www.schurter.com /PG81_82
EMC Products
Dimension [mm]
Case 25-P
40
32
28
4.8
40
32
30.8
(0.8)
10
8
3.5
28
2.5
1)
1)
Case 47-P
50
40
35
5.8
50
40
45.8
(0.8)
10
8
3.5
35
2.5
1)
1)
Case 32-P
80
65
56
6.8
80
65
70.8
(0.8)
10
12
4.5
56
4
1)
1)
1) Spacing given at pin base
Derating Curves
% of nominal current
Allowed current versus ambient temperature
3
Suppression Chokes
DLFL
https://www.schurter.com /PG81_82
EMC Products
All Variants
I
n
[A] L
n
[mH] Inductance
drop max [%]
R
cu
[mΩ]
Tripped Power
Dissipation
f
RES
[MHz]
Cx [µF] Copper ø
[mm]
Weight [g] Housings Packing unit [pcs.] Order Number
5 1 60 120 3 0.8 0.047 1 144 g 25-P 20 DLFL-0125-0501
8 0.5 60 54 3.5 1.32 0.1 1.25 154 g 25-P 20 DLFL-0125-08D5
█
45 0.2 70 6 12 1.1 1 5 1423 g 32-P 2 DLFL-0132-45D2
12 0.5 60 38 5.5 1.16 0.1 1.7 333 g 47-P 10 DLFL-0147-12D5
16 0.3 60 25 6.4 1.69 0.22 1.8 325 g 47-P 10 DLFL-0147-16D3
25 0.15 60 10 6.3 2.5 0.47 2.36 336 g 47-P 10 DLFL-0147-25D2
█
35 0.05 60 5.3 6.5 3.5 1.5 1.5 x 4.5 338 g 47-P 10 DLFL-0147-35C5
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Inductance drop at In
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
30.11.2017
P1-P3

DLFL-0147-35C5

Mfr. #:
Buy DLFL-0147-35C5
Manufacturer:
Schurter
Description:
Fixed Inductors DLFL Saturat choke 35A
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet