Part number is refer to left table.
96WDQGDUG&DSDFLWRUV
6HULHV'%
Specifications
Item
Tolerance at rated capacitance (%)
Internal resistance
at 1 kHz
Characteristics at high
and low temperature
Internal resistance (Ω)
Percentage of capacitance change
Internal resistance
Less than five times of the value at 20℃
Marking color : White print on an indigo sleeve
Performance
Category temperature range (℃)
DB
DBN
Low resistance
Unit : mm
Test time : 1000 hours ; Same as endurance.
Test time
Percentage of capacitance change
Internal resistance
1000 hours
Within four times of the initial specified value
Max. operating voltage (V)
Rated capacitance (F)
φD×L (mm)ELNA Parts No.
5.5
5.5
5.5
5.5
DB-5R5D473T
DB-5R5D104T
DB-5R5D224T
DB-5R5D334T
13.5×7.5
13.5×7.5
13.5×7.5
13.5×7.5
0.047
0.1
0.22
0.33
5.5
5.5
Part numbering system (example : 5.5V0.1F)
DB-5R5D474T
DB-5R5D105T
21.5×8.0
21.5×8.0
0.47
5.5
DB-5R5D474ST
13.5×7.5
0.47
1.0
5.5
DB-5R5D155T
21.5×8.0
1.5
9/RZ5HVLVWDQFH
Specifications
6HULHV'%1
Item
Performance
Standard Ratings
Part numbering system (example : 5.5V0.047F)
*5((1
&$3
&
Endurance (70℃)
Shelf life (70℃)
Conforms to JIS C5160-1 2009 (IEC 62391-1 2006)
Applicable standards
ー25 to ＋70
Rated capacitance (F)
Within ±30% of
the value at 20℃
Within ±30% of the initial measured value
Outline Drawing Standard Ratings
*5((1
&$3
&
/RZ
(65
●
Internal resistance was reduced to 85% to DB series.
●
It excels in rapid charge.(It can charge and discharge
with 1.5 times as much current (mA) as rated capacitance.)
ー25 to ＋70
Tolerance at rated capacitance (%)
Internal resistance
at 1 kHz
Characteristics at high
and low temperature
Category temperature range (℃)
Endurance (70℃)
Shelf life (70℃)
Applicable standards
Internal resistance (Ω)
Percentage of capacitance change
Internal resistance
Less than five times of the value at 20℃
Test time
Percentage of capacitance change
Internal resistance
1000 hours
Within four times of the initial specified value
Rated capacitance (F)
Within ±30% of the value at 20℃
Within ±30% of
the initial measured value
ー20 to ＋80
ー20 to ＋80
Test time : 1000 hours ; Same as endurance.
Conforms to JIS C5160-1 2009 (IEC 62391-1 2006)
●
Small-sized, large capacity, excellent voltage holding.
●
For all ratings, uniform 5mm pitch of terminal spacing.
●
Wider temperature range （−25 to ＋70°C） than battery.
●
φ21.5×7.5 ℓ size can encase up to 1.5F.
●
Ideal for backing up of CMOS’s, IC’s,
microcomputers, RAM’s, RTC’s and the like
used in Video’s, tuners, TV sets,
telephone sets and others.
DBN-5R5D473T5.5 13.5×7.5
DBN-5R5D104T5.5 13.5×7.5
DBN-5R5D224T5.5 13.5×7.5
DBN-5R5D334T5.5 13.5×7.5
DBN-5R5D474T5.5 21.5×8.0
DBN-5R5D105T
0.047
0.1
0.22
0.33
0.47
DBN-5R5D474ST5.5 13.5×7.50.47
1.05.5 21.5×8.0
DBN-5R5D155T1.55.5 21.5×8.0
φD×L (mm)ELNA Parts No.
Max. operating voltage (V)
Rated capacitance (F)
Part number is refer to above table.
0.047 0.1 0.22 0.33 0.47
120 75 75 75
75（φ13.5）30（φ21.5）
0.47 1.0 1.5
30 30
104
Reted capacitance
symbol
T̶ 5R5
Reted voltage
symbol
DB
Series code
D
Terminal
code
Additional
symbol
473
Reted capacitance
symbol
T̶ 5R5
Reted voltage
symbol
DBN
Series code
D
Terminal
code
Additional
symbol
Sleeve
1.2±0.1
0.8±0.1
5.0±0.3
0.5±0.1
6.0±1
6.0±1L Max φD Max
Sn plated teminal
（4.0±0.5）
（3.0±0.5）
0.047 0.1 0.22 0.33 0.47
25 25 25 25
25（φ13.5）20（φ21.5）
0.47 1.0 1.5
20 20
Electric Double Layer Capacitors
188
CAT.No.2013/2014E
NOTE
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
®
DB, DBN
ELECTRIC DOUBLE LAYER CAPACITORS “DYNACAP”
