ISL78301FVECZ-T

1
DATASHEET
40V, Low Quiescent Current, 150mA Linear Regulator
for Automotive Applications
ISL78301
The ISL78301 is a high voltage, low quiescent current linear
regulator ideally suited for “always-on” and “keep alive”
automotive applications. The ISL78301 operates from an input
voltage of +6V to +40V under normal operating conditions and
operates down to +3V under a cold crank. It consumes only 18µA
of quiescent current at no load on the adjustable version.
The ISL78301 is available in a fixed 3.3V, 5V and adjustable
output voltage (2.5V to 12V) options. It features an EN pin that
can be used to put the device into a low-quiescent current
shutdown mode where it draws only 2µA of supply current. The
device features over-temperature shutdown and current limit
protection.
The ISL78301 is AEC-Q100 qualified. It is rated over the -40°C to
+125°C automotive temperature range and is available in a
14 Ld HTSSOP with an exposed pad package.
Applications
•Automotive
•Industrial
Telecommunications
Features
Optimized for “always-on” automotive applications
18µA typical quiescent current
Guaranteed 150mA output current
Operates through cold crank down to 3V
40V tolerant logic level (TTL/CMOS) enable input
2µA of typical shutdown current
Low dropout voltage of 295mV at 150mA
Fixed +3.3V, +5.0V and adjustable output voltage options
Stable operation with 10µF output capacitor
Thermal shutdown and current limit protection
-40°C to +125°C operating temperature range
Thermally enhanced 14 Ld exposed pad HTSSOP package
AEC-Q100 qualified
5kV ESD HBM rated
Pb-free (RoHS compliant)
FIGURE 1. TYPICAL APPLICATION - ADJ VERSION
FIGURE 2. TYPICAL APPLICATION - FIXED VERSION
FIGURE 3. QUIESCENT CURRENT vs LOAD CURRENT (ADJ VERSION AT UNITY GAIN) V
IN
= 14V
IN
OUT
EN
(ISL78301)
ADJ
GND
C
IN
0.1µF
C
OUT
10µF
R1
R2
V
IN
= 14V V
OUT
= 12V
IN
OUT
EN
(ISL78301)
GND
C
IN
0.1µF
C
OUT
10µF
V
IN
= 14V V
OUT
= 5V
0
5
10
15
20
25
-50 0 50 100 150
TEMPERATURE (°C)
QUIESCENT CURRENT (µA)
April 7, 2015
FN6705.2
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Copyright Intersil Americas LLC 2011, 2013, 2015. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
ISL78301
2
FN6705.2
April 7, 2015
Submit Document Feedback
Block Diagram
Pin Configuration
ISL78301
(14 LD HTSSOP)
TOP VIEW
REFERENCE
+
SOFT-START
CONTROL
LOGIC
THERMAL
SENSOR
+
-
EA
VIN
EN
GND
VOUT
FET DRIVER
WITH CURRENT
LIMIT
ADJ
1
2
3
4
14
13
12
11
5
6
7
10
9
8
NC
IN
NC
NC
NC
NC
EN
OUT
NC
ADJ/NC
NC
NC
NC
GND
THERMAL
PAD
Pin Descriptions
PIN NUMBER PIN NAME DESCRIPTION
1, 3, 4, 5, 6, 9, 10,
11, 13
NC Pins have internal termination and can be left unconnected. Connection to ground is optional.
2 IN Input voltage pin. A minimum 0.1µF ceramic capacitor is required for proper operation.
7 EN Enable pin. High on this pin enables the device.
8 GND Ground pin.
12 ADJ/NC In the adjustable output voltage option, this pin is connected to the external feedback resistor divider which sets
the LDO output voltage. In the 3.3V and 5V options, this pin is not used and can be connected to ground.
14 OUT Regulated output voltage. A 10µF ceramic capacitor is required for stability.
EPAD It is recommended to solder the EPAD to the ground plane.
ISL78301
3
FN6705.2
April 7, 2015
Submit Document Feedback
Ordering Information
PART NUMBER
(Notes 1
, 2, 3)
PART
MARKING
TEMP. RANGE
(°C)
ENABLE
PIN
OUTPUT VOLTAGE
(V)
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL78301FVEAZ 78301 FVEAZ -40 to +125 Yes 3.3 14 Ld HTSSOP M14.173B
ISL78301FVEBZ 78301 FVEBZ -40 to +125 Yes 5.0 14 Ld HTSSOP M14.173B
ISL78301FVECZ 78301 FVECZ -40 to +125 Yes ADJ 14 Ld HTSSOP M14.173B
NOTES:
1. Add “-T*” suffix for tape and reel. Please refer to TB347
for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte
tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
3. For Moisture Sensitivity Level (MSL), please see product information page for ISL78301
. For more information on MSL please see techbrief TB363.

ISL78301FVECZ-T

Mfr. #:
Manufacturer:
Renesas / Intersil
Description:
LDO Voltage Regulators AUTO40V ALWAYS-ONLDO W/ENABLE 3 VCC 14LD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union