OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

CWR-130-16-0000

P1-P3P4-P4
• 130 James Way, Southampton, PA 18966 - 3838 • Telephone: (215) 355-7080 • Fax: (215) 355-1088 • www.cwind.com
30
DIP Connectors
The CW Dual-In-Line Plug (DIP) connector is used for rapid, permanent connection
of ribbon cable to a PC board or to a standard DIP socket when connect/disconnect
capabilities are required. The cover is factory preassembled to the connector base to
simplify assembly to cable and has ridges for cable alignment. CW DIP connectors
are Mil-DTL-83503/6 approved.
• Beveled corner on cover and base
at pin #1 provides orientation and
contact identification.
• No alignment tools required.
Cable fits snugly between base’s
cover-support posts, and is guided
into position by ridges molded into
inner surface of cover.
• No special cable preparation
required. Factory preassembled
cover minimizes assembly time.
Cable is inserted and terminated in
one simple step.
• No “bare shoulders”. No exposure
of unnecessary sections of the
contact and possible shorting at the
PC board interface.
• Sturdy terminal posts are strong,
yet flexible enough to withstand
occasional bending and
straightening without fatigue.
31
• 130 James Way, Southampton, PA 18966 - 3838 • Telephone: (215) 355-7080 • Fax: (215) 355-1088 • www.cwind.com
DIP Connectors
Con tact
• Patented offset tines
produce Torq-Tite™
termination for added
reliability.
• Double barbs bite into
plastic, retaining contact
firmly in insulator.
• Spring-temper phosphor
bronze contact material
resists breakage
during bending or
straightening
operations.
• Two tail lengths are
available for use with
standard or low profile
DIP sockets. .012 in. x
.021 in. contact cross-
section provides proper
mating with a variety of
DIP sockets.
DIP Connector Features
• Mil-DTL-83503/6 approved
• One-piece construction.
• 14, 16, 24,and 40 pin versions.
• Patented Torq-Tite™ contacts, ensure reliable gas-tight
terminations.
• Gold-plated phosphor bronze contacts, standard tin-lead
plated contacts optional.
• Accepts 28-30 AWG stranded or solid conductors.
• Simple assembly – bench press or low cost hand tool is all that’s
needed for terminating cable and connectors.
• All pin numbers clearly marked and legible before and after
assembly. Numbering is arranged to meet MIL-DTL-83503
specifications for standard IC DIP numbering.
• Optional strain relief clips are easily installed. Allows top center,
vertical cable routing to reduce possibility of damage to contact
pins during removal of DIP from socket.
• Two contact tail lengths available — .175 in. standard or optional
130 in. length for mating with low profile Dip Sockets.
Strain Relief
Optional metal strain relief straps are available.
Connection is isolated from mechanical strain
by the bend in the cable, as it is folded over
the top of the assembled connector. The Strain
Relief Strap is placed over the cable and
snaps into a recess on the connector. A
centralized top cable exit is created in the
finished cable assembly.
Contact Identification
Every contact position is numbered, per Mil-
DTL-83503, for easy identification. In addition,
a beveled corner at pin #1 enhances
orientation of the connector to the mating DIP
Socket, even in blind installations.
Assembly
The CT200 DIP Hand Tool is designed to
terminate out 14 and 16 pin DIP Connectors. It
is easy to use, lightweight and compact,
making it an ideal tool for field replacement
work or low volume assembly applications. DIP
connectors can also be assembled to cable
using CW’s CT301 76/84 Bench Press.
• 130 James Way, Southampton, PA 18966 - 3838 • Telephone: (215) 355-7080 • Fax: (215) 355-1088 • www.cwind.com
32
14/16 Pin DIP Connector
24 Pin DIP Connector
40 Pin DIP Connector
DIP Connectors
Dimensions
Engineering Dimensions
PAT. 3,993,393
17
13
15
14
16
19
18 21
20
23
22
24
12
10
11
8
9
3
6
7
4
5
1
2
CONTACT
TAIL LENGTH
(9.1)
(2.54)
STRAIN RELIEF
STRAP-OPTIONAL
.100
(33.5)
(27.94)
TYP.
.36
1.264 ±.010
(32.1 ±.25)
NOTCHED CORNER ORIENTS
No. 1 CONTACT LOCATION.
TYP.
CONNECTOR COVER SHOWN
CONNECTOR COVER SHOWN
IN OPEN POSITION.
IN CLOSED POSITION.
.248
(6.30)
(.30)
(15.24)
(8.8)
.012
.35
(18.3)
.021
(.54)
TYP.
(±.25)
±.010
1.100
1.32
.600
.72
PAT. 3,993,393
17
21 23
22
19
20 18
38
27
25
24
26
29
28
30
34
31
32
33
36
35
37
1016
15
14
12
13
11
9
7
8
5
6
3
4
39
40
1
2
.100
STRAP-OPTIONAL
(2.54)
STRAIN RELIEF
(9.1)
TYP.
(18.3)
CONNECTOR COVER SHOWN
IN OPEN POSITION.
(15.24)
IN CLOSED POSITION.
CONNECTOR COVER SHOWN
No. 1 CONTACT LOCATION.
NOTCHED CORNER ORIENTS
(52.50 ±.25)
(48.26)
TYP.
(.54)
.021
(53.9)
TYP.
(.30)
CONTACT
TAIL LENGTH
(6.30)
.248
.012
.35
(8.8)
(±.25)
±.010
2.067 ±.010
.36
1.900
.600
2.12
.72
PAT. 3,993,393
7
6
5
4
3
2
1
8
9
10
11
12
13
14
AVAILABLE WITH 16 POSITIONS.)
(14 CONTACT POSITIONS SHOWN, ALSO
(8.1)
.32
STRAP-OPTIONAL
STRAIN RELIEF
(10.7)
IN CLOSED POSITION.
IN OPEN POSITION.
CONNECTOR COVER SHOWN
CONNECTOR COVER SHOWN
(±.25)
±.010
(6.30)
.248
.34
(8.6)
.012
(7.62)
(.30)
TYP.
NOTCHED CORNER ORIENTS
No. 1 CONTACT LOCATION.
(±.25)
.100
(2.54)
TYP.
±.010
(.54)
.021
TYP.
CONNECTOR DIMENSIONS
NO. OF
CONTACTS
A
BC
14
16
.60
(15.2) (19.2)
.754
(20.6)
.81
.854
(17.8)
.70
(21.7) (23.1)
.91
TAIL LENGTH
CONTACT
B
A
C
.300
.42
P1-P3P4-P4

CWR-130-16-0000

Mfr. #:
Buy CWR-130-16-0000
Manufacturer:
CW Industries
Description:
Headers & Wire Housings Dip Conn .175in Solder Tails 16 Pin
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet