For more information, visit freescale.com
Freescale, the Freescale logo and QorlQ are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. QUICC Engine
is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. The
Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are trademarks and service
marks licensed by Power.org. © 2014–2015 Freescale Semiconductor, Inc.
Document Number: T1023RDBFS REV 1
The T1023RDB also supports 2 GB of DDR4 at
1600 MHz, 128 MB of NOR flash, and 512 MB
NAND flash.
The QorIQ T1023RDB is loaded with the Linux
®
Software Development Kit (SDK) for QorIQ
Processors v1.7. The SDK includes a 64-bit
SMP Linux kernel, hugetlbfs for applications
with a large memory footprint, user space
DPAA for high-performance packet handling,
U-boot, the GCC tool chain, virtualization
support and many other features.
QorIQ T1023RDB Board
Features:
Processor:
• QorIQT1023processorat1.4GHzdual-
core with 1600 MT/s DDR4 data rate
• MultipleSysClkinputsforgenerating
various device frequencies
Memory:
• 2GBDDR4SDRAMUDIMM/RDIMM(32-
bit bus)
• 128MBNORflash,16-bit
• 512MBSLCNANDflash
• SDconnectortointerface
PCI Express
• TwoMini-PCIeGen2.0x1laneconnectors
USB 2.0:
• OneUSBport,connectedtoUSBPHY
Ethernet
• Oneon-boardSGMII10/100/1000Mbps
Ethernet Port
• Oneon-boardSGMII2.5GEthernetPort
• Oneon-boardRGMII10/100/1GEthernet
port
• PoE(PoweroverEthernet)
UART
• OneUART(RJ45)portatupto
115,200 bps
Other
• JTAG/COPfordebug
• ThermalMonitor
About the T1 Family
The QorIQ T1 family is based on the 64-bit
e5500 core, built on Power Architecture
®
technology, offering speeds up to 1400 MHz.
It has a three-level cache hierarchy with
32 KB of instruction and data cache per core,
256 KB of low-latency backside L2 cache per
core, and a 256 KB shared platform cache.
This scalable, pin-compatible family also
features the industry’s first 64-bit embedded
processor with an integrated Gigabit Ethernet
switch that simplifies hardware design,
reduces power and overall system cost.
The QorIQ T1 family of communications
processors also supports a 32/64-bit DDR3L
and DDR4 SDRAM memory controller with
ECC support running at up to 1600 MT/s
data rate. It includes two high-speed USB2.0
controllers(withintegratedPHY),fourUARTs,
an SD/MMC interface, an integrated flash
controller supporting NAND and NOR flash
memory, four I
2
C and SPI. It also includes
the accelerator blocks collectively known as
the Data Path Acceleration Architecture, that
offload various tasks from the core, including
routine packet handling, security algorithm
calculation, and pattern matching. In addition,
the T1024 and T1040 family of processors
integrate a QUICC Engine module offering
support for legacy protocols such as TDM,
HDLC, UART and ISDN and includes support
for hardware-assisted virtualization.
Software and Tool Support
Freescale and our partner network deliver
a wide range of tools, run-time software,
reference solutions and services to accelerate
your designs.
• QorIQT1023referencedesignboard
(T1023RDB-PC)
• CodeWarriorDevelopmentStudiofor
Power Architecture
• FreescaleLinuxSDK
• VortiQaApplicationSoftware
VortiQa application identification software
(AIS)
Enterprise software for networking
VortiQa open network switch software
VortiQa open network director software
• ProfessionalServicesandSupport
Commercial services
Linux SDK support package
Reference Design Software
(RDS support package)
• Third-partysoftwareandtools
Enea, Green Hills, Mentor Graphics and
WindRiver
Orderable parts:
T1023RDB-PC