http://www.tracopower.com
Input Specifications
No load input current –3 mA typ.
Reflected ripple current 100 mAp-p typ.
Input filter internal capacitors
Output Specifications
Voltage set accuracy ±2 % (at full load)
Regulation – Input variation 1.0 % max.
– Load variation (10 – 100 %) 0.6 % max.
Startup voltage overshoot 1.0 % max.
Minimum load not required
Ripple and noise (20 MHz Bandwidth) 5.0 – 5.2 VDC models: 50 mVpk-pk max.
6 – 15 VDC models: 75 mVpk-pk max.
Temperature coefficient ±0.015 % / °C max.
Dynamic load response (change of 50% to 100% load) 5% of Vout mV peak variation
250 µs max. response time
Startup time – start up time at nominal Vin, constant resistive load 15 mS typ.
– rise time for 10 % to 90 % Vout 10 mS typ.
Short circuit protection continuous, automatic recovery
Capacitive load 5.0 – 5.2 VDC models: 1600 µF max.
6.0 – 9.0 VDC models: 1000 µF max.
12 – 15 VDC models: 470 µF max.
General Specifications
Temperature ranges – Operating –40°C to +85°C
– Storage –55°C to +125°C
Derating 3.3 %/K above +70°C
Thermal shock, mechanical shock & vibration MIL-STD-810F
– Test conditions www.tracopower.com/products/mil810.pdf
Overtemperature protection at +165°C (on internal IC)
Humidity (non condensing) 5 – 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >8’475’000 h
Isolation voltage none
Switching frequency 5.0 – 5.2 VDC models: 380 kHz typ.
6.0 – 15 VDC models: 500 kHz typ.
Physical Specifications
Casing material non-conductive plastic
Potting material silicon (flammability to UL 94V-0 rated)
Weight 3.1 g ( 0.11 oz )
Soldering profile max. +265°C / 10 sec. (wave soldering)
Environmental compliance – Reach www.tracopower.com/overview/tsn1
– RoHS RoHS directive 2011/65/EU
DC/DC Converters
TSN-1 Series -1 A
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Page 2 of 3