Z-Power LED X10490 Z-Power LED X10490
Technical Data Sheet
Rev. 00
Nov. 2012
www.Acrich.com
13
8. Cautions for use
9. Handling of silicone resin for LEDs
• Please attach a varistor for protecting surge according to the application note
• Please attach a resistance according to the application note
• Please note Acrich runs on high voltage so use caution when near the leads
or if a dome is inadvertently removed while circuit is active
• Please do not touch any of the circuit board, components or terminals with
bare hands or metal while circuit is electrically active.
• Please do not add or change wires while Acrich circuit is active
• Please do not touch wire on solder pad at driving AC source
• The appearance and specifications of the product may be modified for
improvement without notice.
• Long time exposure of sunlight or occasional UV exposure will cause lens
discoloration.
• Attaching LEDs, do not use adhesives that outgas organic vapor.
• Please do not use together with the materials containing Sulfur
• Please do not assemble under the condition of moisture and oxidizing gas in the
air(Cl, H2S,NH3,SO2,NOX,etc)
• Acrich series is encapsulated with silicone resin for high optical efficiency.
• Please do not touch the silicone resin area with sharp objects such as
pincette(tweezers).
• Finger prints on silicone resin area may affect the performance.
• Please store LEDs in covered containers as it is dust sensitive.
• Excessive force more than 3000gf to the silicone lens can result in fatal or
permanent damage with LEDs.
• Please do not cover the silicone resin area with any other resins such as
epoxy, urethane, etc.
