MG2FA4M70 Datasheet MG2FA4M70, MGM12JT470K | P1-P3

Rev Date: 03/07/2017 1 www.seielect.com

This specification may be changed at any time without prior notice marketing@seielect.com

Please confirm technical specifications before you order and/or use.

MG/MGM Series

High Voltage Metal Glaze Resistor

Stackpole Electronics, Inc.

Resistive Product Solutions

Maximum Resistance

Type / Code Working Temperature

Voltage

Silicone

Epoxy

Coefficient (1) 1%, 5%, 10%

MG14 0.25W

1600V

400V 500V

MG12

0.5W 3500V 500V 700V

MG1 1W 4500V 500V

1000V

MG2

2W 7000V 700V 1200V

MGM12 0.5W 1700V 400V 500V

MGM1 1W 4000V 500V

700V

MGM2

2W 5000V 500V 1000V

MGM3 3W

7000V 700V 1200V

(1) ±50 ppm/ºC available for some values and sizes. Contact factory.

Ohmic Range (Ω) and Tolerance

1K - 1G

Power Rating

(Watts) @ 70ºC

Dielectric Withstanding

Voltage

±100 ppm/ºC

Features:

• High voltage capability from 1600 to 7000 volts

• Inexpensive high voltage leaded resistor solution

• High resistance values up to 1G

• Tolerances as low as 1%; TCRs as low as 50PPM/ºC

• Flameproof coating (brown) standard;

• Epoxy coating (blue) available up to 2W

• RoHS compliant

Electrical Specifications

Mechanical Specifications

0.248 ± 0.020 0.091 ± 0.012 1.102 ± 0.079 0.022 ± 0.001 inches

6.30 ± 0.50 2.30 ± 0.30 28.00 ± 2.00 0.55 ± 0.03 mm

0.354 ± 0.020 0.126 ± 0.020 1.024 ± 0.079 0.026 ± 0.001 inches

9.00 ± 0.50 3.20 ± 0.50 26.00 ± 2.00 0.65 ± 0.03 mm

0.453 ± 0.039 0.157 ± 0.020 0.945 ± 0.079 0.031 ± 0.001 inches

11.50 ± 1.00 4.00 ± 0.50 24.00 ± 2.00 0.78 ± 0.03 mm

0.610 ± 0.039 0.197 ± 0.020 1.260 ± 0.079 0.031 ± 0.001 inches

15.50 ± 1.00 5.00 ± 0.50 32.00 ± 2.00 0.78 ± 0.03 mm

0.248 ± 0.020 0.091 ± 0.012 1.102 ± 0.079 0.022 ± 0.001 inches

6.30 ± 0.50 2.30 ± 0.30 28.00 ± 2.00 0.55 ± 0.03 mm

0.354 ± 0.020 0.157 ± 0.020 1.024 ± 0.079 0.026 ± 0.001 inches

9.00 ± 0.50 4.00 ± 0.50 26.00 ± 2.00 0.65 ± 0.03 mm

0.453 ± 0.039 0.177 ± 0.020 1.378 ± 0.079 0.031 ± 0.001 inches

11.50 ± 1.00 4.50 ± 0.50 35.00 ± 2.00 0.78 ± 0.03 mm

0.610 ± 0.039 0.197 ± 0.020 1.260 ± 0.079 0.031 ± 0.001 inches

15.50 ± 1.00 5.00 ± 0.50 32.00 ± 2.00 0.78 ± 0.03 mm

MG14

MG12

MGM2

Type / Code

MGM3

MG1

MG2

MGM12

MGM1

Body Length

Body Diameter

Lead Length (Bulk)

Lead Diameter

Unit

Rev Date: 03/07/2017 2 www.seielect.com

This specification may be changed at any time without prior notice marketing@seielect.com

Please confirm technical specifications before you order and/or use.

MG/MGM Series

High Voltage Metal Glaze Resistor

Stackpole Electronics, Inc.

Resistive Product Solutions

Test Requirement

Short Time Overload ± (1% + 0.05Ω)

Moisture Resistance ± (5% + 0.05Ω)

Load Life ± (3% + 0.05Ω)

Insulation Resistance > 10,000 MΩ

Resistance to Soldering Heat ± (1% + 0.05Ω)

Temperature Cycling ± (1% + 0.05Ω)

Terminal Strength ± (1% + 0.05Ω)

Intermittent Overload ± (1% + 0.05Ω)

Operating Temperature Range: -55ºC to +175ºC

Percent Rated Power (%)

100

-55ºC

70ºC

175ºC

Ambient Temperature (ºC)

120

140

160

180

-60

100

Power Derating Curve:

Performance Characteristics

Packaging Specifications

Type / Code B1/B2 S Unit

2.047 + 0.039 /-0.00 0.047 0.031 max. 0.020 max. 0.047 max. 0.236 ± 0.020 0.197 inches

52.00 + 1.00 /-0.00 1.20 0.80 max. 0.50 max. 1.20 max. 6.00 ± 0.50 5.00 mm

2.047 + 0.039 /-0.00 0.047 0.031 max. 0.020 max. 0.047 max. 0.236 ± 0.020 0.197 inches

52.00 + 1.00 /-0.00 1.20 0.80 max. 0.50 max. 1.20 max. 6.00 ± 0.50 5.00 mm

2.874 + 0.039 /-0.00 0.059 0.031 max. 0.020 max. 0.047 max. 0.236 ± 0.020 0.197 inches

73.00 + 1.00 /-0.00 1.50 0.80 max. 0.50 max. 1.20 max. 6.00 ± 0.50 5.00 mm

2.874 + 0.039 /-0.00 0.059 0.031 max. 0.020 max. 0.047 max. 0.236 ± 0.020 0.394 inches

73.00 + 1.00 /-0.00 1.50 0.80 max. 0.50 max. 1.20 max. 6.00 ± 0.50 10.00 mm