3
D3DC Miniature Door Switch
D
3
D
C
Precautions
★Please refer to "Common Precautions" for correct use.
●Handling
• In order to ensure stable contact force for contacts, actuate
beyond the recommended operating point (NO contact) and
release to free position (NC contact).
• Do not expose the switch to shocks, such as by dropping it.
Doing so may damage or deform the switch.
• Do not apply lubrication to the sliding parts. Doing so may
result in faulty operation or contact failure.
●Mounting
• This product does not have a waterproof or drip-proof
construction. Ensure that water does not enter the switch
interior.
• In particular, do no use the switch in locations where water
may be spilled or flow over the switch. Doing so may result in
deterioration of the Switch.
• Also, if the contact is kept open for long period of time, it is
recommended to use the Sealed Switch to prevent sulfuration
of the Contact.
• Pay attention to the creepage distance/clearance distance for
insulation after wiring onto terminal when a mounting frame is
made of metal.
●Wiring
• Do not use the Switch with Connector mounted and weight
load applied to the Connector and lead wire, otherwise it may
rattle or may result in connection failure.
●Using Micro Loads
• Even when using micro load models within the operating range
shown below, if inrush/surge current occurs, it may increase
the contact wear and so decrease durability. Therefore, insert
a contact protection circuit where necessary.
• The L-level reference value applies for the minimum applicable
load.
• This value indicates the malfunction reference level for the
reliability level of 60% (λ
60). (JIS C5003)
• The equation, λ
60=5×10
-6
/operations indicates that the
estimated malfunction rate is less than operations
with a reliability level of 60%.
Connector
• The terminals connect to JST’s XA Connector.
Contact: SXA-001T-P0.6
Housing: XAP-02V-1
• OMRON does not sell the XA Connector.
• Contact JST Mfg. for more information on the connectors.
J.S.T. Manufacturing Co.,Ltd.
http://www.jst-mfg.com/index_e.php
Cautions
Correct Use
Recommended operating position
(3)
30
24
12
5
0
1 10 100 1,000
Current (mA)
0.1
1 mA
Operating range
0.16 mA
100 mA
100 mA
Voltage (V)