SLMD960H12

IXYS reserves the right to change limits, test conditions and dimensions © 2010 IXYS All rights reserved
IXYS KOREA LTD.
1 IXYS Corporation
906-5 Iui-dong, Yeongtong-Gu, Suwon, Gyeonggi-Do (Korea) 1590 Buckeye Drive, Milpitas, CA 95035-7418
Phone +82-31-888-5232, Fax +82-31-888-5233 Rev.Jan. 2011 Phone (408) 457-9000, Fax 408-496-0670
IXOLAR
TM
High Efficiency SolarMD.
Description
IXOLAR
TM
SolarMD is an IXYS product line of Solar Module made of monocrystalline, high efficiency solar
cells. The IXOLAR
TM
SolarMD is an ideal for charging various battery powered and handheld consumer
products such as mobile phones, cameras, PDAs, MP3-Players and toys. They are also suitable for
industrial applications such as wireless sensors, portable instrumentation and for charging emergency
backup batteries.
With a cell efficiency of typically 22%, SolarMD gives the ability to extend run time even in "low light"
conditions and increase battery life and run time in a small footprint, which can be easily accommodated in
the design of portable products. The design allows connecting SolarMD flexibly in series and/or parallel to
perfectly meet the custom-specific application’s power requirements.
IXOLAR
TM
products have a very good photonic response over a wide range of wavelength and therefore
can be used in both indoor and outdoor applications.
Product and Ordering Information
(parameters given are typical values)
Dimensions (L x W x H): 42.0 x 35.0 x 2.0 [mm]
SolarMD Weight: 4.5 grams
SolarMD are compliant to the RoHS Norm.
SolarMD Electrical Characteristics
Symbol Cell Parameter Typical
Ratings *)
Units
VOC open circuit voltage 7.56
V
ISC short circuit current 40
mA
Vmpp voltage at max. power point 6.06
V
Impp current at max. power point 36
mA
Pmpp maximum peak power 218
mW
FF fill factor > 70
%
η solar cell efficiency 22
%
ΔVOC/ΔT
open circuit voltage temp. coefficient -2.1
mV/K
ΔJSC/ΔT
short circuit current temp. coefficient 0.12
mA/(cm²K)
*) All values measured at Standard Condition: 1 sun (= 1000 W/m²), Air Mass 1.5, 25°C
Part Number
Open Circuit
Voltage [V]
Short Circuit
Current [mA]
Typ. Voltage
@ Pmpp [V]
Typ. Current
@ Pmpp [mA]
SLMD4235 7.56 40.0 6.06 36.0
Features
• Monocrystalline silicon technology
• High efficiency outdoor and indoor
• Long life and stable output
• Sealed Package
• High mechanical robustness
Applications
• Battery chargers for portables such as cell
phones, PDAs, GPS-Systems, …
• “Green” electricity generation
• Power backup for UPS, Sensors, Wearables
Advantages
• One Product for Multiple Applications
• Flexible Integration into the Application
IXYS reserves the right to change limits, test conditions and dimensions © 2010 IXYS All rights reserved
IXYS KOREA LTD.
2 IXYS Corporation
906-5 Iui-dong, Yeongtong-Gu, Suwon, Gyeonggi-Do (Korea) 1590 Buckeye Drive, Milpitas, CA 95035-7418
Phone +82-31-888-5232, Fax +82-31-888-5233 Rev.Jan. 2011 Phone (408) 457-9000, Fax 408-496-0670
Typical SolarMD Performance Data
Open-Circuit Voltage vs. Irradiance External Quantum Efficiency
IXYS reserves the right to change limits, test conditions and dimensions © 2010 IXYS All rights reserved
IXYS KOREA LTD.
3 IXYS Corporation
906-5 Iui-dong, Yeongtong-Gu, Suwon, Gyeonggi-Do (Korea) 1590 Buckeye Drive, Milpitas, CA 95035-7418
Phone +82-31-888-5232, Fax +82-31-888-5233 Rev.Jan. 2011 Phone (408) 457-9000, Fax 408-496-0670
Package front-side and back-side view. (dimensions in millimeters)
Front-side View Cell Size
Front-side View details Back-side View details
Moisture Sensitivity, Reflow Soldering and Washing Information
IXYS has characterized the moisture reflow sensitivity of the SolarMD using IPC/JEDEC standard J-STD-020. Moisture uptake from
atmospheric humidity occurs by diffusion. During the solder reflow process, in which the component is attached to the PCB, the whole
body of the component is exposed to high process temperatures. The combination of moisture uptake and high reflow soldering
temperatures may lead to moisture induced delamination and cracking of the component. To prevent this, this component must be
handled in accordance with IPC/JEDEC standard J-STD-020 per the labeled moisture sensitivity level (MSL), level 1. IXYS does not
recommend the use of chlorinated solvents.
Surface Protection Film
Please be advised that SLMD module is normally covered with protection film by factory to prevent it from scratch or dirt during the
transportation, Therefore it is highly recommended to remove the protection film at the end of your work. Especially when SLMD
should go through the high temperature process or environment, the film should be removed in advance. If protection film is not
wanted, please consult with us.

SLMD960H12

Mfr. #:
Manufacturer:
Description:
MONO SOLAR CELL 42MM X 35MM
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet