DATASHEET
SMD B
EAST3215RA4-AM
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 28-Sep-2010 .Issue No: 1
www.everlightamericas.com
2. Current limiting
A resistor should be used to limit current spikes that can be caused by voltage fluctuations. Otherwise
damage could occur.
3. Storage
3.1 Moisture proof bag should only be opened immediately prior to usage.
3.2 Environment should be less than 30℃ and 60% RH when moisture proof bag is opened.
3.3 After opening the package MSL Conditions stated on page 1 of this spec should not be exceeded.
3.4 If the moisture sensitivity card indicates higher than acceptable moisture, the component should be baked
at min. 60deg +/-5deg for 24 hours.
4. Iron Soldering
Hand soldering is not recommended for regular production. These guidelines are for rework only. Soldering
iron tip should contact each terminal no more than 3 sec at 350℃, using soldering iron with nominal power
less than 25W. Allow min. 2 sec. between soldering intervals.
5. Usage
Do not exceed the values given in this specification.
Application Restrictions
1. High reliability applications such as military/aerospace, automotive safety/security systems, and medical
equipment may require different product. If you have any concerns, please contact Everlight before using
this product in your application. This specification guarantees the quality and performance of the product as
an individual component. Do not use this product beyond the specification described in this document.
