Test condition
Capacitance change
tan b
ESR( 1)
Leakage current ( 2)
105°C, rated voltage 2000Hrs.
Within ±20% of initial value before test
150% or less than the initial specified value
150% or less than the initial specified value
Less than or equal to the initial specified value
–55 to +105°C
4.0 to 25V
10 to 1200μF
±20% at 120Hz, 20°C
Less than or equal to the specified value at 120Hz, 20°C
Less than or equal to the specified value at 100kHz, 20°C
Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C
Specifications
Performance CharacteristicsItem
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Endurance
Tangent of loss angle (tan b)
Leakage Current ( 2)
ESR ( 1)
1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
(mm)
qD×L
6.3×7
6.3×10
8×11.5
10×12.5
qd
0.45
0.5
0.6
0.6
P
2.5
2.5
3.5
5.0
α
1.0
1.0
1.5
1.5
Aluminum case
Stand off
Wire(Lead free)
Dimensions
FP
62Ba
101
20
/RW1R
3URGXFW/RJR
9ROWDJH
&DSDFLWDQFH
FPCAP part number
FP 020 RE 101 M NS PH
&RQILJXUDWLRQ
/HDG)RUPLQJ
&RQWUROFRGH
&DSDFLWDQFHWROHUDQFH
&DSDFLWDQFH
)
9ROWDJH9
6HULHVQDPH
7\SH
φD
±0.5
MAX.
P
±0.5
L+α
MAX.
15
MIN.
4
MIN.
φd
Type numbering system (Example : 20V 100μF)
Nichicon part number
5
1
'
0
'
1
3
+
&RQILJXUDWLRQ
/HDG)RUPLQJ
&RQWUROFRGH
&DSDFLWDQFHWROHUDQFH
5DWHGFDSDFLWDQFH)
5DWHGYROWDJH9
6HULHVQDPH
7\SH
6
Low ESR, High ripple current.
correspondence.
Compliant to the RoHS directive (2011/65/EU).