1
LT1218/LT1219
■
Rail-to-Rail Input and Output
■
90
µ
V V
OS(MAX)
for V
CM
= V
–
to V
+
■
High Common Mode Rejection Ratio: 97dB Min
■
C-Load
TM
Stable Version (LT1219)
■
High A
VOL
: 500V/mV Minimum Driving 10kΩ Load
■
Wide Supply Range:
2V to ±15V (LT1218/LT1219)
2V to ±5V (LT1218L/LT1219L)
■
Shutdown Mode: I
S
< 30µA
■
Low Supply Current: 420µA Max
■
Low Input Bias Current: 18nA Typical
■
300kHz Gain-Bandwidth Product (LT1218)
■
Slew Rate: 0.10V/µs (LT1218)
FEATURES
DESCRIPTION
U
The LT
®
1218/LT1219 are bipolar op amps which combine
rail-to-rail input and output operation with precision speci-
fications. Unlike other rail-to-rail amplifiers, the LT1218/
LT1219’s input offset voltage is a low 90µV across the
entire rail-to-rail input range, not just a portion of it. Using
a patented technique, both input stages of the LT1218/
LT1219 are trimmed: one at the negative supply and the
other at the positive supply. The resulting common mode
rejection of 97dB minimum is much better than other rail-
to-rail input op amps. A minimum open-loop gain of
500V/mV into a 10k load virtually eliminates all gain error.
The LT1218 has conventional compensation which
assures stability for capacitive loads of 1000pF or less.
The LT1219 has compensation that requires the use of a
0.1µF output capacitor, which improves the amplifier’s
supply rejection and reduces output impedance at high
frequencies. The output capacitor’s filtering action also
reduces high frequency noise, which is beneficial when
driving A/D converters.
High and low voltage versions of the devices are offered.
Operation is specified for 3V, 5V and ±5V supplies for the
LT1218L/LT1219L and 3V, 5V and ±15V for the LT1218/
LT1219.
APPLICATIONS
U
■
Driving A/D Converters
■
Test Equipment Amplifiers
■
MUX Amplifiers
Precision Rail-to-Rail Input
and Output Op Amps
C-Load is a trademark of Linear Technology Corporation.
, LTC and LT are registered trademarks of Linear Technology Corporation.
Voltage Follower Input to Output ErrorMUX Amplifier
TYPICAL APPLICATION
U
–
+
–
+
LT1218L
LT1218L
V
OUT
V
IN1
V
IN2
INPUT
SELECT
5V
5V
74HCO4
1218/19 • TA01
SHDN
MAXIMUM IN
TO OUT ERROR
= 110µV FOR
0.05V ≤ V
IN
≤ 4.8V
R
L
= 10k
SHDN
INPUT VOLTAGE (V)
0
ERROR (mV)
1234
LT1218/19 • TA02
5
V
S
= 5V
A
V
= 1
NO LOAD
10
1.0
0.1
0.01
0.05 4.95
MAX ERROR = 110µV
0.05V ≤ V
IN
≤ 4.8V