This aluminized moisture barrier bag is designed to provide
protection to moisture and ESD sensitive items including outside
an ESD protected area. The bags are heat sealable and suitable
for vacuum packaging. Bags are printed the ESD protective and
moisture sensitive symbols and a lot code for traceability.
SCS Moisture Barrier Bags 3370 are manufactured from a laminate
of multiple layers of aluminized polyester and polyethylene. Polyester
provides puncture resistance. Metalized layer provides shielding
of Electrostatic Discharge (ESD) and minimizes the penetration of
electrostatic and electric elds.
DRAWING
NUMBER
3370 Series
DATE
April
2017
© 2017 DESCO INDUSTRIES INC.
Employee Owned
3370 SERIES MOISTURE BARRIER BAG
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE: StaticControl.com
PHONE (919) 718-0000
Moisture Barrier Bag 3370
Specifications and procedures subject to change without notice.
Bag is free of amines, silicones and heavy metals.
This product is intended for commercial use only. This product is not on the Qualied Product Listing
under the Defense Standardization Program.
RoHS 2, REACH, and Conflict Minerals Statement
None of the RoHS 2 restricted materials or REACH substances of very high concern as
of 2017/01/12, or Conflict Minerals are intentionally added in manufacturing this product.
Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE.
See SCS Warranty, Limitation of Liability and Remedies
Open Top Bag ZipTop Bag
Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Oset O to 0.250
Seal width +/- 0.125
Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541
and Static Control Bag ANSI/ESD S11.4 Level 3
Made in the United States of America with Globally Sourced Materials.
Physical Typical Value Testing Method
Moisture Vapor
Transmission Rate (MVTR)
0.028 grams/100 sq. in./24 hrs MIL-STD-3010C Method 3030
Tensile Strength
7800 PSI, 54 MPa
ASTM D882
Puncture Resistance
20 lbs, 89 N
MIL-STD-3010 Method 2065
Seal Strength
16 lbs, 71 N
ASTM D882
Thickness
3.6 mils, 0.0036" +/-15%
MIL-STD-3010 Method 1003
Marking Adhesion
Pass
IPC-TM-650 2.4.1
Electrical Typical Value Testing Method
ESD Shielding <10 nJ ANSI/ESD STM11.31
Surface Resistance - Interior
1 x 10
4
to < 1 x 10
11
ohms
ANSI/ESD STM11.11
Surface Resistance - Exterior
1 x 10
4
to < 1 x 10
11
ohms
ANSI/ESD STM11.11
Cleanliness Typical Value Testing Method
Silicone Not Detected FTIR
Outgassing
150 µg/cm
2
DHS
NVR
7.1 µg/cm
2
Hexane Extract
IC (Anions)
CL .025 µg/cm
2
IC of DI Water Extract
NO3 0.16 µg/cm
2
IC of DI Water Extract
S04 not detected IC of DI Water Extract
Heat Sealing Conditions Typical Value
Temperature 400°F, 204°C
Time
0.6 – 4.5 seconds
Pressure
30 – 70 PSI, 206 – 482 KPa
Tolerance: Width -0, +1/4"
Length +/- 1/8" Oset 0 to 1/4"
Seal width 3/8" with a tolerance of +/- 1/8"
Note: Standard bag markings shown
above are not to scale.
NOTE: The complete dry package concept of packaging for electronics requires three elements:
Moisture Barrier Bags - To Protect
Desiccants - To Absorb Moisture
Humidity Indicator Cards - To Monitor Performance
