NMTTLD6S5MC
Digital Isolator DC/DC
KDC_NMTTLD6S5MC.A01 Page 2 of 8
www.murata-ps.com/support
ELECTRICAL CHARACTERISTICS (Continued)
Parameter Test conditions Min. Typ. Max. Units Symbol
Logic low (Output)
I
Ox = 20µA, VIx = VIxH = 4.9 for secondary 0.0 0.1 V VOL
IOx = 4mA, VIx = VIxH = 4.6 for secondary 0.2 0.4 V VOL
Input current per channel 0V ≤ VIx ≤ 5V, 0V ≤ VCTRLx ≤ 5V -10 +0.01 +10 µA II
Quiescent Supply Current
Regulator input side 0.5 0.6 mA IDDL (Q)
I/O Input 0.027 0.05 mA IDDIL (Q)
Regulator output side 1.26 1.7 mA IDDO (Q)
I/O Output 0.031 0.1 mA IDDOL (Q)
Dynamic Supply Current
Regulator input side 0.07
mA/Mbps
IDDL (D)
I/O Input 0.9
µA/Mbps
IDDIL (D)
Regulator output side 0.01
mA/Mbps
IDDO (D)
I/O Output 0.02
mA/Mbps
IDDOL (D)
AC Specifications
Output rise/Fall time 10% to 90% 2.5
ns
Common-mode transient immunity V
Ix = VDDL, VCM = 1000V, transient magnitude = 800V 25 35 kV/µs CM
Refresh period 1.66 µs t
r
DC-DC CHARACTERISTICS
INPUT CHARACTERISTICS
Parameter Conditions Min. Typ. Max. Units
Voltage range Continuous operation 4.5 5 5.5 V
Input Current 5V input 280 mA
Input reflected ripple current 5V input 6 mA p-p
OUTPUT CHARACTERISTICS
Parameter Conditions Min. Typ. Max. Units
Line regulation Low line to high line 1.1 1.3 %%
Load Regulation All output types 5 10 %
Ripple and noise 25 50 mV p-p
Power
5V Regulated 0.4
W
Total available power across all outputs 0.8
TEMPERATURE CHARACTERISTICS
Parameter Conditions Min. Typ. Max. Units
Operation See derating curve -40 95
°CStorage -50 125
Product temperature rise above ambient Measured in the isolation barrier 20
ISOLATION CHARACTERISTICS
Parameter Conditions Min. Typ. Max. Units
Isolation capacitance 5pF
Isolation test voltage
Production tested for 1 second 1500 VAC rms
Qualification tested for 1 minute 1500 VAC rms
Resistance Viso = 1kVDC 5 GΩ
GENERAL CHARACTERISTICS
Parameter Conditions Min. Typ. Max. Units
MTTF
- nominal input voltage at full load
MIL-HDBK-217 FN2 4000 kHrs
Telcordia SR-332 20000 kHrs
Switching frequency 90 kHz
ABSOLUTE MAXIMUM RATINGS
Parameter Conditions Value
Input voltage 6V
Logic teminal voltages -0.5V to V
in +0.5V