88970042 Datasheet 88970042 | P1-P3

"Compact" range with display CD12 Part number 88970042

Green LCD with 4 lines of 18 characters and configurable backlighting

More cost effective solution

Industrial temperature range (-20°C→+55°C)

Analogue inputs 0-10 VDC or 0-20 mA/Pt100 with converters

Selective parameter setting : You can choose the parameters that can be adjusted on the front panel

Part numbers

Specifications

Type

Inputs

Outputs

Supply

88970042

CD12

8 digital (including 4 analogue)

4 solid state 0.5 A (including 1 PWM)

24 V DC

General environment characteristics for CB, CD, XD, XB, XR and XE product types

Certifications

CE, UL, CSA, GL

Conformity to standards (with the low voltage directive

and EMC directive)

IEC/EN 61131

2 (Open equipment)

IEC/EN 61131

-2 (Zone B)

IEC/EN 61000

-6-2,

IEC/EN 61000

-6-3 (*)

IEC/EN 61000

-6-4

(*) Except configuration (88 970 1.1 or 88 970 1.2) + (88 970 250 or 88 970 270) + 88 970 241 class A (class B in a metal enclosure)

Earthing

None

Protection rating

In accordance with IEC/EN 60529 :

IP40 on front panel

IP20 on terminal block

Overvoltage category

3 in accordance with IEC/EN 60664

-1

Pollution

Degree : 2 in accordance with IEC/EN 61131

-2

Max operating Altitude

Operation : 2000 m

Transport : 3,048 m

Mechanical resistance

Immunity to vibrations IEC/EN 60068

-2-6, Fc test

Immunity to shock IEC/EN 60068

-2-27, Fa test

Resistance to electrostatic discharge

Immunity to ESD IEC/EN 61000

-4-

2, level 3

Resistance to HF interference

Immunity to radiated electrostatic fields

IEC/EN 61000

-4-3,

Immunity to fast transients (burst immunity)

IEC/EN 61000

-4-

4, level 3

Immunity to shock waves

IEC/EN 61000

-4-5

Radio frequency in common mode

IEC/EN 61000

-4-

6, level 3

Voltage dips and breaks (AC)

IEC/EN 61000

-4-11

Immunity to damped oscillatory waves

IEC/EN 61000

-4-12

Conducted and radiated emissions

Class B (*) in accordance with EN 55022, EN 55011 (CISPR22, CISPR11) group 1

(*) Except configuration (88 970 1.1 or 88 970 1.2) + (88 970 250 or 88 970 270) + 88 970 241 class A (class B in metallic cabinet)

Operating temperature

20→+55°C(+40°Cinanon

-ventilated enclosure) in accordance with IEC/EN 60068-2-

1 and IEC/EN 60068

-2-2

Storage temperature

40→+70°CinaccordancewithIEC/EN60068

-2-

1 and IEC/EN 60068

-2-2

Relative humidity

95 % max. (no condensation or dripping water) in accordance with IEC/EN 60068-2-30

Mounting

On symmetrical DIN profile, 35 x 7.5 mm and 35 mm x 15 or panel (2 x 4 mm Ø)

Screw terminals connection capacity

Flexible wire with ferrule =

1 conductor : 0.25 to 2.5 mm

(AWG 24...AWG 14)

2 conductors 0.25 to 0.75 mm

(AWG 24...AWG 18)

Semi

-rigid wire =

1 conductor : 0.2 to 2.5 mm

(AWG 25...AWG 14)

Rigid wire =

1 conductor : 0.2 to 2.5 mm

(AWG 25...AWG 14)

2 conductors 0.2 to 1.5 mm

(AWG 25...AWG 16)

Tightening torque =

0.5 N.m (4.5 lb

-in) (tighten using screwdriver diam. 3.5 mm)

Processing characteristics of CB, CD, XD & XB product

types

LCD display

CD, XD : Display with 4 lines of 18 characters

Programming method

Function blocks / SCF (Grafcet) or Ladder

Program size

For CB, CD :

4 Ko : 64 macros max.

256 blocks max. per macro

Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected

02/11/2015 www.crouzet.com

180 typical blocks

For XB, XD :

8 Ko : 64 macro max.

256 blocks max. per macro

350 typical blocks

Or for CB, CD, XB, XD : 120 lines in Ladder

Program memory

Flash EEPROM

Removable memory

EEPROM

Data memory

368 bit/200 words

Back-up time in the event of power failure

Program and settings in the controller : 10 years

Program and settings in the plug

-in memory : 10 years

Data memory : 10 years

Cycle time

Functionblocks:6→90ms(typically20ms)

Ladder : typically 20 ms

Response time

Input acquisition time : 1 to 2 cycle times

Clock data retention

10 years (lithium battery) at 25 °C

Clock drift

Drift < 12 min/year (at 25 °C)

6 s/month (at 25 °C with user-definable correction of drift)

Timer block accuracy

1 %

2 cycle times

Start up time on power up

< 1,2 s

Characteristics of products with AC power supplied

Supply

24 V AC

(88970..4)

100→240VAC

(88970..3)

Nominal voltage

24 V AC

100→240VAC

Operating limits

-15 % / +20 %

or20.4VAC→28.8VAC

-15 % / +10 %

or85VAC→264VAC

Supply frequency range

50/60 Hz (+4 % / -6 %)

or47→53Hz/57<63Hz

50/60 Hz (+4 % / -6%)or47→53Hz/57<63Hz

Immunity from micro power cuts

10 ms (repetition 20 times)

Max. absorbed power

CB12

CD12

XD10

-XB10 : 4 VA

CB20

-CD20 : 6 VA

XD10

-XB10 with extension : 7,5 VA

XD26

-XB26 : 7.5 VA

XD26

-XB26 with extension : 10 VA

CB12

CD12

XD10

-XB10 : 7 VA

CB20

-CD20 : 11 VA

XD10

-XB10 with extension : 12 VA

XD26

-XB26 : 12 VA

XD26

-XB26 with extension : 17 VA

Isolation voltage

1780 V AC

Inputs

24 V AC

(88970..4)

100→240VAC

(88970..3)

Input voltage

24 V AC (-15 % / +20 %)

100→240VAC(-15 % / +10 %)

Input current

4,4 mA @ 20,4 V AC

5,2 mA @ 24,0 V AC

6,3 mA @ 28,8 V AC

0,24 mA @ 85 V AC

0,75 mA @ 264 V AC

Input impedance

4.6 k

350 k

Logic 1 voltage threshold

≥14VAC

≥79VAC

Making current at logic state 1

>2 mA

>0.17 mA

Logic 0 voltage threshold

≤5VAC

≤20VAC(≤28VAC:XE10,XR06,XR10,XR14)

Release current at logic state 0

<0.5 mA

Response time with LADDER programming

50 ms

State0→1(50/60Hz)

50 ms

State 0 < 1 (50/60 Hz)

Response time with function blocks programming

Configurable in increments of 10 ms

50 ms min. up to 255 ms

State0→1(50/60Hz)

Configurable in increments of 10 ms

50 ms min. up to 255 ms

State0→1(50/60Hz)

Maximum counting frequency

In accordance with cycle time (Tc) and input response time (Tr) :

1/ ( (2 x Tc) + Tr)

In accordance with cycle time (Tc) and input response time (Tr) :

1/ ( (2 x Tc) + Tr)

Sensor type

Contact or 3-

wire PNP

Contact or 3-

wire PNP

Input type

Resistive

Isolation between power supply and inputs

None

Isolation between inputs

None

Protection against polarity inversions

Yes

Status indicator

On LCD screen for CD and XD

Characteristics of relay outputs common to the entire range

Max. breaking voltage

5→30VDC

24→250VAC

Breaking current

XB10

XD10

XR06

XR10 : 8 A

XD26

-XB26 : 8 x 8 A relays, 2 x 5 A relays

XE10 : 4 x 5 A relays

XR14 : 4 x 8 A relays, 2 x 5 A relays

Electrical durability for 500 000 operating cycles

Usage category DC

-12 : 24 V, 1.5 A

Usage category DC

-13 : 24 V (L/R = 10 ms), 0.6 A

Usage category AC-12 : 230 V, 1.5 A

Usage category AC-15 : 230 V, 0.9 A

Max. Output Common Current

12A for O8,O9,OA

Minimum switching capacity

10 mA (at minimum voltage of 12 V)

Minimum load

12 V, 10 mA

Maximum rate

Off load : 10 Hz

At operating current : 0.1 Hz

Mechanical life

10,000,000 operations (cycles)

Voltage for withstanding shocks

In accordance with IEC/EN 60947

1 and IEC/EN 60664

-1 : 4 kV

Off-cycle response time

Make 10 ms

Release 5 ms

Built

-in protections

Against short-circuits : None

Against overvoltages and overloads : None

Status indicator

On LCD screen for CD and XD

Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected

02/11/2015 www.crouzet.com

Characteristics of product with DC power supplied

Supply

12 V DC

(88970..5 & 8970814 & 88970840)

24 V DC

(88970..1 et 88970..2)

Nominal voltage

12 V DC

24 V DC

Operating limits

-13 % / +20 %

or 10.4 V DC < 14.4 V DC (including ripple)

-20 % / +25 %

or 19.2 V DC < 30 V DC (including ripple)

Immunity from micro power cuts

≤1ms(repetition20times)

Max. absorbed power

CB12 with solid state outputs : 1.5 W

CD12 : 1.5 W

CD20 : 2.5 W

XD26

XB26 : 3 W

XD26

-XB26 with extension : 5 W

XD26 with solid state outputs : 2.5 W

CB12

CD12

-CD20 with solid state outputs -

XD10

-XB10 with solid state outputs : 3 W

XD10

-XB10 with relay outputs : 4 W

XD26

-XB26 with solid state outputs : 5 W

CB20

-CD20 with relay outputs : 6 W

XD26 with relay outputs : 6 W

XD10

-XB10 with extension : 8 W

XD26

-XB26 with extension : 10 W

Protection against polarity inversions

Yes

Digital inputs (I1 to IA and IH to IY)

12 V DC

(88970..5 & 88970814 & 88970840)

24 V DC

(88970..1 and 88970..2)

Input voltage

12 V DC (

-13 % / +20 %)

24 V DC (

-20 % / +25 %)

Input current

3,9 mA @ 10,44 V DC

4,4 mA @ 12,0 V DC

5,3 mA @ 14,4 VDC

2,6 mA @ 19,2 V DC

3,2 mA @ 24 V DC

4,0 mA @ 30,0 VDC

Input impedance

2.7 k

7.4 k

Logic 1 voltage threshold

≥7VDC

≥15VDC

Making current at logic state 1

≥2mA

≥2.2mA

Logic 0 voltage threshold

≤3VDC

≤5VDC

Release current at logic state 0

<0.9 mA

<0.75 mA

Response time

1→2cycletimes+6ms

Maximum counting frequency

I1 & I2 : FBD (Up to 6 k Hz) & Ladder (1 k Hz)

I3 to IA & IH to IY : in accordance with cycle time (Tc) and input

response time (Tr) : 1/ ( (2 x Tc) + Tr)

I1 & I2 : FBD (Up to 6 k Hz) & Ladder (1 k Hz)

I3 to IA & IH to IY : in accordance with cycle time (Tc) and input

response time (Tr) : 1/ ( (2 x Tc) + Tr)

Sensor type

Contact or 3-

wire PNP

Contact or 3-

wire PNP

Conforming to IEC/EN 61131

-2

Type 1

Input type

Resistive

Isolation between power supply and inputs

None

Isolation between inputs

None

Protection against polarity inversions

Yes

Status indicator

On LCD screen for CD and XD

Analogue or digital inputs (IB to IG)

12 V DC

(88970..5 & 88970814 & 88970840)

24 V DC

(88970..1 and 88970..2)

CB12

CD12

XD10

XB10

4inputsIB→IE

CB20

CD20

XB26

XD26

6inputsIB→IG

Inputs used as analogue inputsonly in FBD

Measurement range

(0→10V)or(0→Vpowersupply)

Input impedance

14 k

12 k

Input voltage

14.4 V DC max

30 V DC max

Value of LSB

14 mV

29 mV

Input type

Common mode

Resolution

10 bit at maximum input voltage

Conversion time

Controller cycle time

Accuracy at 25 °C

5 %

Accuracy at 55 °C

6.2 %

Repeat accuracy at 55 °C

2 %

Isolation between analogue channel and power supply

None

Cable length

10 m maximum, with shielded cable (sensor not isolated)

Protection against polarity inversions

Yes

Potentiometer control

2.2 k

0.5 W (recommended)

10 k

Ω

max.

2.2 k

0.5 W (recommended)

10 k

Ω

max.

Inputs used as digital inputs

Input voltage

12 V DC (

-13 % / +20 %)

24 V DC (

-20 % / +25 %)

Input current

0,7 mA @ 10,44 VDC

0,9 mA @ 12,0 VDC

1,0 mA @ 14,4VDC

1,6 mA @ 19,2 VDC

2,0 mA @ 24,0 V DC

2,5 mA @ 30,0 VDC

Input impedance

14 k

12 k

Logic 1 voltage threshold

≥7VDC

≥15VDC

Making current at logic state 1

≥0.5mA

≥1.2mA

Logic 0 voltage threshold

≤3VDC

≤5VDC

Release current at logic state 0

≤0.2mA

≤0.5mA

Response time

1→2cycletimes

Maximum counting frequency in FBD

In accordance with cycle time (Tc) and input response time (Tr) :

1/ ( (2 x Tc) + Tr)

In accordance with cycle time (Tc) and input response time (Tr) :

1/ ( (2 x Tc) + Tr)

Sensor type

Contact or 3-

wire PNP

Contact or 3-

wire PNP

Conforming to IEC/EN 61131

-2

Type 1

Input type

Resistive

Isolation between power supply and inputs

None

Isolation between inputs

None

Protection against polarity inversions

Yes

Status indicator

On LCD screen for CD and XD

Characteristics of relay outputs common to the entire

range

Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected

02/11/2015 www.crouzet.com

P1-P3 P4-P5

88970042

Mfr. #:

Buy 88970042

Manufacturer:

Crouzet

Description:

Controllers M3 CD12 8A 24VDC 8 digi 4 analog ins

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

88970042