Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
33
ZAE
Capacitance (µF)
Rated voltage mark
Series identification
Lot number
Negative polarity marking (–)
A±0.2
W
( ) Reference size
L
0D±0.5
H
B±0.2
(I)
K
(P)
(I)
+
–
0.3 max.
Pressure relief (010 and larger)
●
Endurance : 10000 h at 105 °C
●
Low ESR and high ripple current (70 % over, Lower ESR than current V-FP)
●
High voltage (to 80 V.DC)
●
Equivalent to conductive polymer type aluminum electrolytic capacitor
(There are little characteristics change by temperature and frequency)
●
Vibration-proof product is available upon request. (08 mm and larger)
●
AEC-Q200 compliant
●
RoHS compliant
Speci cations
Features
Marking Dimensions (not to scale)
Surface Mount Type
Series : ZA Type : V
High temperature Lead-Free re ow
Capacitance tolerance ±20 % (120 Hz/+20 °C)
DC leakage cur rent I
<
0.01 CV or 3 (µA) After 2 minutes (whichever is greater)
Dissipation factor (tan
d
)
Please see the attached standard products list
Endurance
105 °C, 10000 h, apply the rated ripple current without exceeding the rated voltage
Capacitance change Within ±30% of the initial value
tan
d
<
200 % of the initial limit
E. S. R.
<
200 % of the initial limit
DC leakage current Within the initial limit
ESR after Endurance
(Ω/100 kHz) (–40 °C)
Size code
CDD8FG
2.0 1.4 0.8 0.4 0.3
Shelf life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Damp heat (Load)
85 °C, 85 % to 90 %, 2000 h, rated voltage applied
Capacitance change Within ±30% of the initial value
tan
d
<
200 % of the initial limit
E. S. R.
<
200 % of the initial limit
DC leakage current Within the initial limit
Resistance to
soldering heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10% of the initial value
tan
d
Within the initial limit
DC leakage current Within the initial limit
Example : 25 V.DC 33 µF Marking color : BLACK
Rated voltage mark
Size
code
D L A, B H I W P K
C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35
- 0.20
D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2
+ 0.15
+ 0.15
+ 0.15
E 25 V.DC
V 35 V.DC
H 50 V.DC
J 63 V.DC
K 80 V.DC
(Unit : mm)
·
The dimensions of the vibration-proof products, please refer to the page of
the mounting specifi cation.
Size code
CDD8FG
Category temp. range
–55 °C to +105 °C
Rated voltage range
25 V.DC to 50 V.DC 25 V.DC to 63 V.DC 25 V.DC to 80 V.DC
Nominal cap.range
10 µF to 33 µF 10 µF to 56 µF 22 µF to 100 µF 22 µF to 220 µF 33 µF to 330 µF
Nov. 201606
