MT9M021, MT9M031
www.onsemi.com
14
DC Electrical Characteristics
The DC electrical characteristics are shown in Table 12,
Table 13, Table 14, and Table 15.
Table 12. DC ELECTRICAL CHARACTERISTICS
Symbol
Definition Condition Min Typ Max Unit
V
DD
Core Digital Voltage 1.7 1.8 1.95 V
V
DD
_IO I/O Digital Voltage 1.7/2.5 1.8/2.8 1.9/3.1 V
V
AA
Analog Voltage 2.5 2.8 3.1 V
V
AA
_PIX Pixel Supply Voltage 2.5 2.8 3.1 V
V
DD
_PLL PLL Supply Voltage 2.5 2.8 3.1 V
V
DD
_SLVS HiSPi Supply Voltage 0.3 0.4 0.6 V
V
IH
Input HIGH Voltage V
DD
_IO * 0.7 – – V
V
IL
Input LOW Voltage – – V
DD
_IO * 0.3 V
I
IN
Input Leakage Current No Pull-up Resistor;
V
IN
= V
DD
_IO or D
GND
20 – –
mA
V
OH
Output HIGH Voltage V
DD
_IO – 0.3 – – V
V
OL
Output LOW Voltage V
DD
_IO = 2.8 V – – 0.4 V
I
OH
Output HIGH Current At Specified V
OH
–22 – – mA
I
OL
Output LOW Current At Specified V
OL
– – 22 mA
CAUTION: Stresses greater than those listed in Table 13 may cause permanent damage to the device. This is a stress rating only, and
functional operation of the device at these or any other conditions above those indicated in the operational sections of this
specification is not implied.
Table 13. ABSOLUTE MAXIMUM RATINGS
Symbol Parameter Minimum Maximum Unit
V
SUPPLY
Power Supply Voltage (All Supplies) –0.3 4.5 V
I
SUPPLY
Total Power Supply Current – 200 mA
I
GND
Total Ground Current – 200 mA
V
IN
DC Input Voltage –0.3 V
DD
_IO + 0.3 V
V
OUT
DC Output Voltage –0.3 V
DD
_IO + 0.3 V
T
STG
Storage Temperature (Note 1) –40 +85 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
Table 14. OPERATING CURRENT CONSUMPTION FOR PARALLEL OUTPUT
(V
AA
= V
AA
_PIX = V
DD
_IO = V
DD
_PLL = 2.8 V; V
DD
= 1.8 V; PLL Enabled and PIXCLK = 74.25 MHz; T
A
= 25°C; C
LOAD
= 10 pF)
Symbol
Parameter Condition Min Typ Max Unit
I
DD
Digital Operating Current Parallel, Streaming, Full Resolution 45 fps − 45 55 mA
I
DD
_IO I/O Digital Operating Current Parallel, Streaming, Full Resolution 45 fps − 50
(Note 1)
– mA
I
AA
Analog Operating Current Parallel, Streaming, Full Resolution 45 fps − 45 50 mA
I
AA
_PIX Pixel Supply Current Parallel, Streaming, Full Resolution 45 fps − 6 10 mA
I
DD
_PLL PLL Supply Current Parallel, Streaming, Full Resolution 45 fps − 6 8 mA
1. I
DD
_IO operating current is specified with image at 1/2 saturation level.