Representative
photograph, actual
product appearance
may vary.
Due to regional
agency approval
requirements, some
products may not be
available in your area.
Please contact your
regional Honeywell
office regarding your
product of choice.
SX15D
Pressure Sensors: Measurement Type: Differential, Gage; 0
psid to 15 psid, Unamplified, Button Package - No Port
Features
● Low Cost
● High-Impedance Bridge
● Absolute and Differential (Gauge)
● Low Noise
● Low Power Consumption for Battery Power
Typical Applications
● Medical
● Instrumentation
● Barometric
● Measurement
● Pneumatic Controls
● Battery Powered Equipment
Description
The SX Series pressure sensors provide the lowest cost components
for measuring pressures up to 150 psi. These sensors are designed
for use with non-corrosive, non-ionic media, such as air and dry
gases. Convenient pressure ranges are available to measure
differential, gauge, and absolute pressures from 0 psi to 1 psi
(SX01) up to 0 psi to 150 psi (SX150).
The Absolute (A) devices have an internal vacuum reference and an
output voltage proportional to absolute pressure. The differential
(D) devices allow application of pressure to either side of the
diaphragm and can be used for gauge or differential pressure
measurements.
This product is packaged in either the standard low cost chip carrier
“button” package, a plastic ported “N” package, or a DIP package.
file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SX15D.htm (1 of 5)15/03/2005 02:38:55 ã