( 7.6 )
( 16.6 )
( 9.4 )
5.5
± 0.1
6
± 0.5
14 6.5
23
10.5 MAX
3
9208B - 1 - 6Z032 - PT1
Made by IRISO ELECTRONICS CO., LTD
PIN HEADER :
PIN124563
M9P = 0.5
5 - 2.54
6 - □0.5
( 11.43 )
16
2 - 0.5
164.9
44
φ
1. Nut 2. Washer
9.4
12.9
0.5
1
2
12
M9 P = 0.75
〈 Accessories 〉
8.2
9.2
9.2
Panel Cut-out Dimensions
Panel Cut-out Dimensions
(Locking type)
±0.1
±
0.1
±0.1
φ
φ
φ
φ
Transistor：RN1707JE eqivalent
Schmitt IC ：TC7W14FK eqivalent
Vcc (5V)
Output "A", "B"
Switch
Switch
GND (OV)
4.7kΩ
Output Circuitry Receiving Circuitry
REC16K/REC16L/REC16M
OPTICAL ENCODERS
Vibration Power OFF
Power OFF
Power OFF
Power ON
Power OFF
Power OFF
Shock
High temperature
exposure
Low temperature
exposure
Humidity
Thermal shock
Power OFF
Power ON
OSingle shaft and PIN HEADER
■
OUTLINE DIMENSIONS Unless otherwise specified, tolerance: ± 0.4 (Unit: mm)
Test item
■
RELIABILITY TEST
The output shall satisfy the criteria below after the following tests.
Test conditions
Amplitude : 1.52 mm or 98.1 m/s
2
(10 G) whichever is smaller.
10 ~ 500 Hz excursion 15 min/cycle, 8 cycles each for X, Z, directions.
3 times each in directions (X, Z) at 490 m/s
2
(50 G), 11 ms.
80 °C 96 h
(To be measured after leaving samples for 1 h at normal temperature and
humidity after the test.)
50 °C 96 h
− 20 °C 96 h
0 °C 96 h
40 °C Relative humidity 90 ∼ 95 % 96 h
(To be measured after wiping out moisture and leaving samples for 1 h at normal temperature and humidity after the test.)
To be done 10 cycles with the following condition
(To be measured after leaving samples for 1 h at normal temperature and humidity after the test.)
80 °C 0.5 h、− 20 °C 0.5 h
■
PIN ASSIGNMENT
Pin No. With switchWithout switch
1
Power 0 (V)Power 0 (V)
2
For switchN C
3
For switchN C
4
Output “B”Output “B”
5
Output “A”Output “A”
6
Power ĸ 5VPower ĸ 5V
■
OUTPUT CIRCUITRY AND RECEIVING CIRCUITRY
