ASDXAVX010NG7A5

4 www.honeywell.com/sensing
Table 5. Sensor Types
Type
Description
Absolute
Output is proportional to difference between applied pressure and built-in reference to vacuum (zero pressure).
Gage
Output is proportional to difference between applied pressure and atmospheric (ambient) pressure.
Differential
Output is proportional to difference between pressure applied to each of the pressure ports (Port 1 Port 2).
Figure 2. Transfer Functions and Limits
A Calibration, 10% to 90%
B Calibration, 5% to 95%
Table 6. Sensor Output at Significant Percentages
% Output
Digital Counts (dec)
Digital Counts (hex)
0%
0
0x0000
5%
819
0x0333
10%
1638
0x0666
50%
8192
0x2000
90%
14746
0x399A
95%
15565
0x3CCD
100%
16383
0x3FFF
Figure 3. Completed Catalog Listing Example
ASDXAVX001PG2A3:
AV pressure port, 1 psi gage, I
2
C output
(Address 0x28), 10% to 90% calibration
at 3.3 Vdc operation.
ASDXAVX001PG2A3 Output vs Pressure
Honeywell Sensing and Control 5
Figure 4. Dimensional Drawings (For reference only: mm [in].)
AV Package (Legacy G2)
RR Package (Legacy D4)
AC Package (Legacy A2)
RV Package
Table 7. Pinout
I
2
C
SPI
Pin
Definition
Type
Description
Pin
Definition
Type
Description
1
SDA
digital I/O
serial bidirectional data;
data is clocked in or out on
clock edge of SCL
1
MISO
digital output
“Master In Slave Out” - serial
output data; data is clocked
out on clock edge of SCK
2
SCL
digital input
serial clock input; used to
clock data on SDA
2
SCK
digital input
serial clock input; used to
clock data on MISO
3
GND
supply
power supply ground
3
GND
supply
power supply ground
4
N/C
not used
do not connect in the
application
4
N/C
not used
do not connect in the
application
5
SS
digital output
interrupt signal (conversion
complete output)
5
SS
digital input
slave select
6
Vsupply
supply
power supply source
6
Vsupply
supply
power supply source
7
N/C
not used
do not connect in the
application
7
N/C
not used
do not connect in the
application
8
N/C
not used
do not connect in the
application
8
N/C
not used
do not connect in the
application
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
www.honeywell.com/sensing
008095-11-EN IL50 GLO Printed in USA
July 2010
Copyright © 2010 Honeywell International Inc. All rights reserved.
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
Failure to comply with these instructions could result
in death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s
standard product warranty applies unless agreed to otherwise
by Honeywell in writing; please refer to your order
acknowledgement or consult your local sales office for specific
warranty details. If warranted goods are returned to Honeywell
during the period of coverage, Honeywell will repair or replace,
at its option, without charge those items it finds defective. The
foregoing is buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special,
or indirect damages.
While we provide application assistance personally, through
our literature and the Honeywell web site, it is up to the
customer to determine the suitability of the product in the
application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this
printing. However, we assume no responsibility for its use.
WARNING
MISUSE OF DOCUMENTATION
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
SALES AND SERVICE
Honeywell serves its customers through a worldwide network
of sales offices, representatives and distributors. For
application assistance, current specifications, pricing or name
of the nearest Authorized Distributor, contact your local sales
office or:
E-mail: info.sc@honeywell.com
Internet: www.honeywell.com/sensing
Phone and Fax:
Asia Pacific +65 6355-2828; +65 6445-3033 Fax
Europe +44 (0) 1698 481481; +44 (0) 1698 481676 Fax
Latin America +1-305-805-8188; +1-305-883-8257 Fax
USA/Canada +1-800-537-6945; +1-815-235-6847
+1-815-235-6545 Fax

ASDXAVX010NG7A5

Mfr. #:
Manufacturer:
Description:
Board Mount Pressure Sensors Axial port I2C 5V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union