Raspberry Pi Camera Board Case with 1/4"
Tripod Mount
PRODUCT ID: 3253
Descri
tion
This is a basic, classic Adafruit Raspberry Pi Camera Board Enclosurewith a black base and a clear
top.The case is as minimal as it gets, coming in just two pieces of polycarbonate that snap snugly
together. This case will keep yourPi Camera safe and secure while also looking super sleek. Works
with Pi Camera v1 and v2.
Theenclosurewas designed by Mike Doell –just like our elegant, beautiful, and functional Pi Cases
for Raspberry Pi Zero and Model B.Made of ultra-durable, super-glossy polycarbonate, it is both
good looking and tough enough to toss into your pocket, bookbag, or toolbox.It has an easy-to-
access slim openingfor your camera cable to extend out from the camera module. The camera
boardsits nicely inthe base, latching to the four little pegs,and the lid fits snugly ontop. There's
also a tiny hole in the lid so not to distort the capturing of images.
On the sides there are two slots so you can strap the camera to something, use zip-ties, tape,
velcro straps, whatever!
On the back is a 1/4" tripod mount nut, so you can attach it to anything with a standard tripod
screw. Note that to keep the enclosure compact we used a slim nut - so attach the case carefully
and make sure not to push the tripod screw through the camera! Just turn it until you feel it
touching the back of the camera and then unscrew a quarter turn.
This product comes with 2 case pieces. Raspberry Pi Camera Board is **not** included. No other
cables or connectors or accessories are included!
Product Dimensions: 50.0mm x 31.0mm x 12.8mm / 2.0" x 1.2" x 0.5"
Product Weight: 7.5g / 0.3oz
EngineeredinNYCAdafruit®
