Specifications
RACD150-PSE
LIGHTLINE
AC/DC-Converter
with 5 Year Warranty
150 Watt
Single
Output
● Universal AC Input
● Constant Voltage / Constant Current Operation
● Active Power Factor Correction
● IP67 Design for Indoor and Outdoor Use
● Cooling by Free Air Convection
● PSE Certified for Japan market
Features
LED DRIVER
Note:
All LED Drivers may not be used without
a load. They must be switched on the
primary side only. Noncompliance may
damage the LED or reduce its lifetime.
Selection Guide
Part CV Mode CC Mode Efficiency
Number Constant Voltage Current Range DC Voltage Range Constant Current (115VAC)
(V) (A) (V) (A) (typ.)
RACD150-12-PSE 12 0-11 9-12 11 85%
RACD150-24-PSE 24 0-6.3 14-24 6.3 87%
RACD150-36-PSE 36 0-4.2 26-36 4.2 90%
RACD150-48-PSE 48 0-3.2 34-48 3.2 90%
Input Voltage Range 90-130 VAC or 127-184VDC
Input Frequency Range 47-63Hz
Power Factor Full Load, 115VAC >0.98
THD Full Load, 115VAC 8% max.
AC Current 115VAC 2A max.
Input / Output Isolation 3.75kVAC / 1minute
Input / Case Isolation 1.8kVAC / 1minute
Output / Case Isolation 0.5kVAC / 1minute
Leakage Current <0.5mA
Current Tolerance ±5%
Voltage Tolerance -1% to 5%
Start-up Time Full Load, 115VAC 1.0s
Ripple & Noise (at 20MHz bandwith) 150mVp-p max.
Over Current Protection 95%-105% rated current Auto-Recovery
Short Circuit Protection Hiccup Mode
Over Voltage Protection 12V 12.5V typ.
Latch Mode 24V 24.5V typ.
(Power off to recover) 36V 36.5V typ.
48V 48.5V typ.
Over Temperature Protection Tcase 95°C ±10°C
Operating Temperature Range without derating -20°C to +50°C (see graph)
(free air convection, according to PSE) Case Temperature 75°C max.
Operation Humidity 20%-90% RH Non-Condensing
Storage Temperature -40°C to +80°C
Storage Humidity 10%-90% RH
Vibration 10-500Hz, 2G, 60 Min. along X, Y and Z
IP Rating IP67
EMC Standards
(designed to meet) EMC Compatibility EN55015
FCC, Part 15
Harmonic Current EN61000-3-2 Class C (
≥75% load)
EN61000-3-3
EMC Immunity EN61000-4-2, 3, 4, 5, 6, 11
continued on next Page
Refer to Application Notes
RoHS
2011/65/EU
6/6
The RACD150-PSE LED driver series offers 150W of power with a universal input voltage range of 90-130VAC and
constant current output up to 11A at a voltage of approximately 12V. The series features a unique dual mode
operation for either constant current or constant voltage making it suitable for driving LEDs directly or via local
constant-current DC/DC modules directly on the light engine board.The RACD150-PSE series are fully sealed IP67 LED
drivers and therefore ideally suited for indoor and outdoor applications including road, street and walkway lighting,
high-bay, LED signage, and outdoor area lighting for car parks, public buildings and tunnels. The LED drivers are PSE
certified and come with a 5 year warranty.
Description
L-68 www.recom-power.comREV: 1/2016
