866B509 Datasheet 810PE205A, 864B509S, 864B509 | P1-P3

- Page 24 -

- Page 25 -

Specifications for "F" Connectors

_____________________________

F style connectors are the least expensive, general purpose connectors with non-constant impedance for use at 500 volts or

less, and for use with low frequencies to 500Mhz. These coaxial connectors are widely used in Cable TV, MATV, CCTV,

and related consumer television products. They are available in a limited selection to fit various cable sizes. NOTE: See

V-Bite 861V509ER6 -40dB @ 2.3GHz

MATERIALS

Connector Parts Material

Connector Body and Parts Brass

Male Contact Pin Brass

Insulators Polypropylene

Platin

Nickel

Ferrule Annealed Coppe

ELECTRICAL

Requirement Performance

Impedance Non Constan

Frequency Range

0-500MHz (see below

861V509ER6 to 3GHz)

VSWR 1.5 Max.

Working Voltage (At Sea level) 500V rms

Insulation Resistance 5000 Megohm Min.

Contact Resistance 3 mW Max.

Test Voltage 1000V r.m.s

MECHANICAL & ENVIRONMENTAL

Requirement Performance

Durability 500 Matings

Shoc

30 G

Cable Retention 40 Lbs. Min.

Temperature Range -40 to +65°C.

Moisture Range Continuous Test

_____________________________

FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 back to index

"F" Connectors

_____________________________

Plugs, Jacks, Adapters

F type plugs are available in three different crimp styles: two piece with separate ferrules, one piece crimp with a short

crimp body and a one piece crimp with a long body. Also, a twist-on type for tool-less installations. Jacks for bulkhead,

inline, or PC board, and a variety of adapters are all machined brass construction.

Part Number Descri

tion

RG/U

Cable

No.

810A209A 2 Piece Crimp Plug, Short Ferrule 6 117

810A209D 2 Piece Crim

Plu

, Short Ferrule 11 117

810A209G 2 Piece Crimp Plug, Short Ferrule 59 117

810B209G 2 Piece Crimp Plug, Long Ferrule 59 118

810D209A 2 Piece Crim

Plu

, Short Ferrule 6 117

810A209MV 4 Pc Crimp Mini Coax. Uses BD11007 Tool 174 117A

810D209D 1 Piece Crimp Plug, Short Ferrule 11 119

810D209G 1 Piece Crim

Plu

, Short Ferrule 59 119

810E209A 1 Piece Crimp Plug, Long Ferrule 6 120

810E209D 1 Piece Crimp Plug, Long Ferrule 11 120

810E209G 1 Piece Crim

Plu

, Lon

Ferrule 59 120

810A409A Twis

-On 6 121

810A409G Twis

-On 59 121

810P209A Push-On 6 122

810P209G Push-On 59 122

816B519 Male Bulkhead Rece

tacle. 3/8-32 THD I.D. An

130A

826B519 Bulkhead Jack, Solder Tab Any 123

832A519N Inline Female/Female W/Nut &Washe

N/A 124

830A509 Inline, Male/Male N/A 125

831B509 Inline Female/Male Push-On N/A 125A

832A519 Inline Female/Female N/A 126

843A509 “T” Ada

ter, Female/Male/Female N/A 127

845A509 “T” Adapter, Female/Female/Female N/A 128

851A509 Right Angle Adapter, Male/Female N/A 129

F0884 75 Ohm Male Terminato

N/A 130

RoHS compliant REQUEST QUOTE REQUEST DRAWING

Fig. 117 Fig. 117A Fig. 118

Fig. 119 Fig. 120 Fig. 121

Also See Push-EZ™ Next Page

Fig. 122 Fig. 123 Fig. 124

Adapters & Terminators

Fig. 125 Fig. 126 Fig. 125A

Fig. 127 Fig. 128

This recessed male acts as a jack & allows for a

replaceable female end by using a 832A519 adapter.

Also, this can be used to accommodate any adapter with

a female F interface on one side. The other end can be

BNC, TNC, or any style available. (See adapter pages)

Fig. 129 Fig. 130

Fig. 130A2

3/8 - 32 Internal Thd. ½ - External Thd.

- Page 26 -

_____________________________

FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 back to index

_________________________

Push EZ™ “F” Plugs With LIFT™

Bomar’s exclusive LIFT® Technology (Low Insertion Force

Termination) is used in the patented Push-EZ™ connector. It installs

by simply stripping the cable and inserting it into the connector.

That’s it. And it will not pull out.

No crimp tooling required.

Part

Numbe

Description

RG/U

Cable

Body

Plating

810PE209A Push-EZ™ Plug with LIFT® Technology 6 Nickel

810PE209G Push-EZ™ Plug with LIFT® Technology 59 Nickel

810PE205A Push-EZ™ Plu

with LIFT® Technolo

6 Gol

810PE205G Push-EZ™ Plug with LIFT® Technology 59 Gol

RoHS compliant REQUEST QUOTE REQUEST DRAWING

PC Board Connectors

Part

Number

Description

RG/U

Cable

Fig.

No.

861A509 PC Board Jack, Vertical N/A 131

861V509E V-Bite™ Edge Mount PC Jac

N/A 131V

861V509ER V-Bite™ Reflow Type w/ TFE Insulator RG59 N/A 131V

861V509ER6

V-Bite™ Reflow Type w/ TFE Insulator RG6/59

(3GHz)

N/A 131V

864B509 PC Board Jack, Ri

ht An

le, Lon

N/A 132

864B509HF PC Board Jack, Right Angle, Long (3GHz) N/A 132

864B509S PC Board Jack, Right Angle, Shor

N/A 133

866B509 PC Board Male, Ri

ht An

le The Eliminator™ N/A 136B

RoHS compliant reflow or wave solder RoHS compliant wave solder

only REQUEST QUOTE

REQUEST DRAWING

P1-P3 P4-P4

866B509

Mfr. #:

Buy 866B509

Manufacturer:

Description:

CONN F PLUG R/A NON-CONSTANT PCB

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

866B509

866B509

Products related to this Datasheet