OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HSML-C130

P1-P3P4-P6P7-P8
HSMx-C130
Surface Mount ChipLEDs
Data Sheet
CAUTION: HSMx-C130 LEDs are Class 1A ESD sensitive per JESD22-A114C.01 standard. Please observe appropriate
precautions during handling and processing. Refer to Application Note AN-1142 for additional details.
Description
The HSMx-C130 ChipLeds are designed specially for the
membrane switch application. The request is to have
as low as possible while retaining the footprint at the
optimal size of a 0603 (1.6 x 0.8 mm) device. Apart from
the membrane switch application, the HSMx-C130 is
also suitable for use in applications where low height is
required.
These chip-type LEDs utilize Aluminum Indium Gallium
Phosphide (AlInGaP) material technology. The AlInGaP
material has a very high luminous eciency, capable of
producing high light output over a wide range of drive
currents.
Four dierent colors are available: amber, red, green, and
orange. All parts are intensity binned and color binned
(except for red color). They come in 8 mm conductive
tape on a 7 inch diameter reel with 4000 units per reel
which make them compatible for automatic placement.
Features
x High brightness AlInGaP material
x Small size with extremely low prole
x 0603 industry standard footprint with 0.35mm height
x Diused optics
x Operating range of -40qC to 85qC
x Available in 4 colors
x Compatible with IR soldering
x Available in 8 mm conductive tape on 7” diameter reel
x Reel sealed in zip locked moisture barrier bags
Applications
x Membrane switch indicator
x LCD backlighting
x Push button backlighting
x Front panel indicator
x Symbol backlighting
x Keypad backlighting
2
Package Dimensions
Device Selection Guide
Part Number Color Die Technology Parts per Reel Package Description
HSMA-C130 Amber AlInGaP 4000 Untinted, Diused
HSMC-C130 Red AlInGaP 4000 Untinted, Diused
HSME-C130 Yellow Green AlInGaP 4000 Untinted, Diused
HSML-C130 Orange AlInGaP 4000 Untinted, Diused
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
2. TOLERANCE IS +/-0.1 mm (+/-0.004 IN.) UNLESS OTHERWISE SPECIFIED.
1.6
(0.063)
0.12 (0.005)
0.3 ± 0.15
(0.012 ± 0.006)
0.23 (0.009)
CATHODE MARK
0.35 (0.014)
0.3 ± 0.15
(0.012 ± 0.006)
1.15
(0.045)
LED DIE
DIFFUSED EPOXY
PCB BOARD
SOLDERING
TERMINAL
0.8 (0.031)
CATHODE LINE
0.7 (0.028) MIN.
POLARITY
(0.80)
3
Absolute Maximum Ratings at TA = 25qC
Parameter AlInGaP Units
DC Forward Current
[1]
20 mA
Power Dissipation 48 mW
Reverse Voltage (I
R
= 100PA)
5V
LED Junction Temperature 95 °C
Operating Temperature Range
-40 to +85qC
Storage Temperature Range
-40 to +85 qC
Soldering Temperature See reow soldering prole (Figure 5
& 6)
Notes:
1. Derate linearly as shown in Figure 4.
Electrical Characteristics at T
A
= 25°C
Part Number
Forward Voltage
V
F
(Volts)
@ I
F
= 20mA
Reverse Breakdown
V
R
(Volts)
@ I
R
= 100PA
Thermal Resistance
RT
JP
(qC/W)
Typical
Typ. Max. Min.
HSMA-C130 2.05 2.40 5 500
HSMC-C130 1.94 2.40 5 500
HSME-C130 1.94 2.40 5 500
HSML-C130 1.94 2.40 5 500
Optical Characteristics at T
A
= 25°C
Part Number
Luminous Intensity
I
V
[1]
(mcd)
@ 20mA
Peak
Wavelength
Opeak (nm)
Typical
Color, Dominant
Wavelength
Od
[2]
(nm)
Typical
Viewing Angle
2 T
1/2
[3]
(Degrees)
TypicalMin. Typ.
HSMA-C130 28.5 87.0 591 589 110
HSMC-C130 28.5 131.0 635 626 110
HSME-C130 18.0 54.0 575 573 110
HSML-C130 28.5 139.0 612 606 110
Notes:
1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the LED
package.
2. The dominant wavelength, O
d
are derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
3. O
1/2
is the o-axis angle where the luminous intensity is ½ the peak intensity.
P1-P3P4-P6P7-P8

HSML-C130

Mfr. #:
Buy HSML-C130
Manufacturer:
Broadcom / Avago
Description:
LED ORANGE DIFFUSED SMD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet