E
UNIT OF ELECTRO SWITCH CORP.
• ELECTRONIC PRODUCTS
2010 Yonkers Road
Raleigh, NC 27604
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016
SPECIFICATIONS
ELECTRICAL
Current and Voltage Rating: Make and break resistive load
1.5 amps @ 28 VDC; 0.5 amp @ 115 VAC.
Current Carrying Capacity: 9 amps.
Dielectric Strength: 1,500 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 3.5 milliohms.
Insulation Resistance: In excess of 750,000 megohms.
Hardware: Mounting nut and lockwasher are shipped assembled.
E3 - SERIES
1 1/2" DIAMETER 1.5 AMPS @ 28 VDC
MECHANICAL
Materials and Finishes: All parts utilize non-corrosive materials
as standard.
Clips and Rotors: Brass with silver plate as standard.
Insulation: Glass epoxy.
Index: Coil spring.
Index Life: 25,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: Positive 30° standard.
Index Stops: Fixed stops standard.
Stop Strength: 25 in. lbs. minimum.
STANDARD
PART
NUMBER
DIMENSIONS
STANDARD CONSTRUCTION E3G - GLASS EPOXY CONSTRUCTION
SPRING RETURN
SWITCHES - 30° INDEXING - FIXED STOPS - SOLDER LUG TERMINALS
ACTIVE POLES/ NO. OF SHORTING NON-
POLES POSITIONS SECTION SECTIONS SHORTING
DESCRIPTION
39
04 02 4 1 E3G0402S-1 E3G0402N-1 .......... SPRING RETURN FROM CLOCKWISE.
06 03 3 2 E3G0603S-2 E3G0603N-2 .......... SPRING RETURN BOTH SIDES TO CENTER.
06 03 3 2 E3G0603S-3 E3G0603N-3 .......... SPRING RETURN CLOCKWISE TO CENTER, POSITIVE INDEX COUNTER CLOCKWISE OF CENTER.
SPECIFICATIONS AND ORDERING INFORMATION
The E3 Series was designed to provide spring return action in an open frame
construction. Standard construction is available with 2 or 3 positions, 30°
index, and solder lug terminals.
1.187
1.187
