DATASHEET
LAMP
EALP05SQARA0
5
Copyright © 2010, Everlight Americas All Rights Reserved. Release
Date :
Aug.09.2011
. Issue No: 1 Rev:1
www.everlightamericas.com
Carrier Tape Dimensions:
Notes:
1.All dimensions are in millimeters, tolerance is 0.25mm except being specified
2.Lead spacing is measured where the lead emerge from the package
Taping Sizes
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
Symbol Items Symbol
Specifications
Avg. Tolerance
mm Inch (mm)
Tape Feed Hole Diameter D 4.0 0.157 ±0.2
Component Lead Pitch F 2.54 0.100 +0.8/-0.2
Front-to-Read Deflection H 0° 0 ±5°
Feed Hole to Button of Component H1 18.50 0.728 ±1.0
Feed Hole to Overall Component Height H2 25.50 0.906 ±1.0
Lead Length after Component Removal L 11.00 0.433 MAX
Feed Hole Pitch P 12.70 0.500 ±0.3
Lead Location P1 5.08 0.200 ±0.7
Center of Component Location P2 6.35 0.250 ±1.2
Overall Taped Package Thickness T 1.42 0.056 MAX
Feed Hole Location W0 9.00 0.354 ±0.5
Adhesive Tape Width W1 13.00 0.512 ±0.5
Adhesive Tape Position W2 2.00 0.079 MAX
Tape Width W3 18.00 0.709 ±0.75