Rev Date: 12/19/2016
3 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Precision Thin Film Chip Resistor
Stackpole Electronics, Inc.
Resistive Product Solutions
Mechanical Specifications
Performance Characteristics
0.023 ± 0.002 0.011 ± 0.002 0.009 ± 0.002 0.005 ± 0.002 0.006 ± 0.002 inches
0.58 ± 0.05 0.29 ± 0.05 0.23 ± 0.05 0.12 ± 0.05 0.15 ± 0.05 mm
0.039 ± 0.002 0.020 ± 0.002 0.012 ± 0.002 0.008 ± 0.004 0.008 ± 0.004 inches
1.00 ± 0.05 0.50 ± 0.05 0.30 ± 0.05 0.20 ± 0.10 0.20 ± 0.10 mm
0.061 ± 0.004 0.031 ± 0.004 0.018 ± 0.004 0.012 ± 0.008 0.012 ± 0.008 inches
1.55 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 0.30 ± 0.20 0.30 ± 0.20 mm
0.079 ± 0.006 0.049 ± 0.006 0.022 ± 0.004 0.012 ± 0.008 0.016 ± 0.008 inches
2.00 ± 0.15 1.25 ± 0.15 0.55 ± 0.10 0.30 ± 0.20 0.40 ± 0.20 mm
0.120 ± 0.006 0.061 ± 0.006 0.022 ± 0.004 0.017 ± 0.008 0.014 ± 0.010 inches
3.05 ± 0.15 1.55 ± 0.15 0.55 ± 0.10 0.42 ± 0.20 0.35 ± 0.25 mm
0.122 ± 0.006 0.094 ± 0.006 0.022 ± 0.004 0.016 ± 0.008 0.022 ± 0.010 inches
3.10 ± 0.15 2.40 ± 0.15 0.55 ± 0.10 0.40 ± 0.20 0.55 ± 0.25 mm
0.193 ± 0.006 0.094 ± 0.006 0.022 ± 0.004 0.024 ± 0.012 0.020 ± 0.010 inches
4.90 ± 0.15 2.40 ± 0.15 0.55 ± 0.10 0.60 ± 0.30 0.50 ± 0.25 mm
0.248 ± 0.006 0.122 ± 0.006 0.022 ± 0.004 0.024 ± 0.012 0.020 ± 0.010 inches
6.30 ± 0.15 3.10 ± 0.15 0.55 ± 0.10 0.60 ± 0.30 0.50 ± 0.25 mm
Tol. ≤ 0.05% Tol. > 0.05%
ΔR±0.05% ΔR±0.2%
Insulation Resistance MIL-STD-202 Method 302
Apply 100 V
DC
for 1 minute
ΔR±0.05% ΔR±0.2%
ΔR±0.05% ΔR±0.3%
Bending Strength JIS-C-5201-1 6.1.4 ΔR±0.05%
ΔR±0.1% Bending amplitude 3 mm for 10 seconds
Solderability MIL-STD-202 Method 208H 245±5°C for 3 seconds
Resistance to Soldering Heat MIL-STD-202 Method 210E ΔR±0.05%
ΔR±0.1% 260±5°C for 10 seconds
Dielectric Withstand Voltage MIL-STD-202 Method 301 Max. overload voltage for 1 minute
Thermal Shock MIL-STD-202 Method 107G ΔR±0.05%
ΔR±0.2% -55°C ~ 150°C, 100 cycles
High Temperature Exposure MIL-STD-202 Method 108 +155°C for 1000 hours
ΔR±0.5% for high power rating
70±2°C, RCWV for 1000 hours with
1.5 h. "ON" and 0.5 h. "OFF"
ΔR±0.5% for high power rating
RCWV (Rated Continuous Working Voltage) = √(P*R) or Max. Operating Voltage, whichever is lower.
40±2°C, 90~95% R.H. RCWV for 1000 hours
with 1.5 h. "ON" and 0.5 h. "OFF"
ΔR±0.5% for high power rating
1 hour, - 65°C, followed by 45 minutes of RCWV
Low Temperature Operation
Storage Temperature: 15~18°C. Humidity < 80% R.H.
Temperature coefficient of
Resistance (T.C.R.)
RCWV*2.5 or Max. overload voltage
whichever is lower for 5 seconds
ΔR±0.2% for high power rating
