P1011NXN2HFB Datasheet P1011NSN2FFB, P1011NSE2FFB, P1011NXN2HFB | P1-P2

Freescale QorIQ communications platforms

are the next-generation evolution of our

leading PowerQUICC communications

processors. Built using high-performance

Power Architecture

cores, QorIQ platforms

enable a new era of networking innovation

where the reliability, security and quality of

service for every connection matters.

QorIQ P1020 and P1011

Communications Processors

The QorIQ P1 platform series, which includes

the P1020 and P1011 communications

processors, offers the value of extensive

integration and extreme power smarts

for a wide variety of applications in the

networking, telecom, defense and industrial

markets. Based on 45 nm technology for

low power implementation, the P1011 and

P1020 processors provide single- and dual-

core solutions for the 533 MHz to 800 MHz

performance range, along with advanced

security and a rich set of interfaces.

The P1011 and P1020 processors are

perfectly suited for multi-service gateways,

Ethernet switch controllers, wireless LAN

access points and high-performance general-

purpose control processor applications with

tight thermal constraints.

The QorIQ P1011 and P1020 processors are

pin-compatible with the QorIQ P2 platform

products, offering a four-chip range of cost-

effective solutions. Scaling from a single core

at 533 MHz (P1011) to a dual core at 1.2 GHz

per core (P2020), the two QorIQ platforms

deliver an impressive 4.5x aggregate

frequency range.

The devices in these two platforms are

software compatible, sharing the e500

Power Architecture core and peripherals,

as well as being fully software compatible

with the existing PowerQUICC processors.

This enables you to create a product with

multiple performance points from a single

board design. The QorIQ P1020 dual-

core processor supports symmetric and

asymmetric processing, enabling you to

further integrate your design with the same

applications running on each core or serialize

your application using the cores for different

processing tasks.

The P1011 and P1020 processors have an

advanced set of features for ease of use.

The 256 KB L2 cache offers incremental

configuration to partition the cache between

the two cores or to configure it as SRAM or

stashing memory. The integrated security

engine supports the cryptographic algorithms

commonly used in IPsec, SSL, 3GPP and

other networking and wireless security

protocols. The memory controller offers

future-proofing against memory technology

migration with support for both DDR2 and

DDR3. It also supports error correction

codes, a baseline requirement for any

high-reliability system.

QorIQ Communications Platforms

P1 Series

P1011 and P1020 single- and dual-core communications processors

QorIQ P1020 and P1011 Block Diagram

32 KB

L1 I-Cache

Power Architecture

e500 Core

32 KB

L1 D-Cache

256 KB

L2 Cache

32 KB

L1 I-Cache

Power Architecture

e500 Core

32 KB

L1 D-Cache

DDR2/DDR3

SDRAM Controller

Not on P1011

Coherency Module

System Bus

4-ch. DMA Controller4-ch. DMA Controller2 x PCI Express

On-Chip NetworkOn-Chip Network

4-lane SerDes

Security

Acceleration

XOR

DUART, 2 x I

C, Timers,

Interrupt Control,

SD/MMC, SPI,

USB 2.0/ULPI

3 x

Gigabit

Ethernet

Enhanced Local Bus

Controller (eLBC)

Cores

TDM

Freescale, the Freescale logo and QorIQ are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. All other

product or service names are the property of their respective owners. The Power Architecture and Power.org word marks

and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.

Document Number: QP10XXFS

REV 5

The QorIQ P1011 and P1020 processors

integrate a rich set of interfaces, including

SerDes, Gigabit Ethernet, PCI Express

and USB. The three 10/100/1000 Ethernet

ports support advanced packet parsing, flow

control and quality of service features, as well

as IEEE

1588 time-stamping—all ideal for

managing the datapath traffic between the

LAN and WAN interface. A TDM interface can

support voice for legacy phone applications.

Four SerDes lanes can be portioned across

two PCI Express ports and two SGMII

ports. The PCI Express ports can provide

connectivity to IEEE 802.11n radio cards for

wireless support. USB or SD/MMC interfaces

can be used to support local storage. A

second USB interface is also available to

support USB attached printers or as a console

port. Multiple memory connection ports are

available, including the 16-bit local bus, two

USB 2.0 controllers, eSDHC and SPI.

Target Applications

The P1011 and P1020 processors serve in

a wide variety of applications. The devices

are well suited for various combinations of

data plane and control plane workloads in

networking and telecom applications. With an

available junction temperature range of -40ºC

to +125ºC, the devices can be used in power-

sensitive defense and industrial applications,

and outdoor environments less protected

from the environment. The devices’ primary

target applications are networking and

telecom linecards.

A multi-service router or business gateway

requires a combination of high performance

and a rich set of peripherals to support the

datapath throughputs and required system

functionality. The P1011 and P1020 devices

offer a scalable platform to develop a

range of products that can support the

same feature set. Integrated 10/100/1000

Ethernet controllers with classification and

QoS capabilities are ideal for managing the

datapath traffic between the LAN and WAN

interface. PCI Express ports can provide

connectivity to IEEE 802.11n radio cards

for wireless support, TDM for legacy phone

interfaces to support voice, the USB or SD/

MMC interfaces can be used to support local

storage, the second USB interface is also

available to support USB attached printers

or as a console port. And the integrated

security engine can provide encrypted secure

communications for remote users with

VPN support.

Technical Specifications

• Dual(P1020)orsingle(P1011)high-

performance Power Architecture e500 cores

36-bit physical addressing

Double-precision floating-point support

32 KB L1 instruction cache and 32 KB L1

data cache for each core

533 MHz to 800 MHz core clock

frequency

• 256KBL2cachewithECC,also

configurable as SRAM and stashing

memory

• Three10/100/1000Mbpsenhancedthree-

speed Ethernet controllers (eTSECs)

TCP/IP acceleration and classification

capabilities

IEEE 1588 support

Lossless flow control

RGMII, SGMII

• High-speedinterfaces(notallavailable

simultaneously)

Four SerDes to 3.125 GHz multiplexed

across controllers

Two PCI Express controllers

Two SGMII interfaces

• TwoHigh-SpeedUSBcontrollers(USB2.0)

Host and device support

Enhanced host controller interface (EHCI)

ULPI interface to PHY

• Enhancedsecuredigitalhostcontroller

(eSDHC)

• Serialperipheralinterface

• Integratedsecurityengine(SEC3.3)

Crypto algorithm support includes 3DES,

AES, RSA/ECC, MD5/SHA, ARC4,

Snow 3G and FIPS deterministic RNG

Single pass encryption/message

authentication for common security

protocols (IPsec, SSL, SRTP, WiMAX)

XOR acceleration

• 32-bitDDR2/DDR3SDRAMmemory

controller with ECC support

• Programmableinterruptcontroller(PIC)

compliant with OpenPIC standard

• Four-channelDMAcontroller

• TwoI

C controllers, DUART, timers

• Enhancedlocalbuscontroller(eLBC)

• 16general-purposeI/Osignals

• Package:689-pinwirebondpower-BGA

(TEPBGA2)

Learn More:

For current information about Freescale

products and documentation, please visit

freescale.com/QorIQ.

QorIQ Platform Device Cores Top Core Frequency L2 Size DDR 2/3 Support GE Ports SerDes PCI Express

Serial RapidIO

TDM

P1 P1011 1 800 MHz 256 KB 32-bit with ECC 3 4 2 N/A Yes

P1 P1020 2 800 MHz 256 KB 32-bit with ECC 3 4 2 N/A Yes

P2 P2010 1 1200 MHz 512 KB 64-bit with ECC 3 4 3 2 N/A

P2 P2020 2 1200 MHz 512 KB 64-bit with ECC 3 4 3 2 N/A

P1-P2

P1011NXN2HFB

Mfr. #:

Buy P1011NXN2HFB

Manufacturer:

NXP / Freescale

Description:

Microprocessors - MPU 800/400/667 ET NE r1.1

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

P1011NXN2HFB

P1011NXN2HFB

Products related to this Datasheet