DSP10-24

1201-800-526-2324 • www.us.tdk-lambda.com/lp/ Disclaimer: us.tdk-lambda.com/lp/legal.htm
DSP Series
Features
Low Pro le for Building Automation
5V to 24V Outputs
Wide Range AC Input
UL1310 Class 2
(1)
Class II Double Insulation
-25 to +71°C Operation
7.5-100W Low Pro le DIN Rail Mount Power Supplies
(1) See model selector on page 2. *Safety certi ed for AC only
Model DSP10 DSP30 DSP60 DSP100
AC Input Voltage range VAC 90 - 264VAC, Class II double insulated (No ground connection required)
Input Frequency Hz 47 - 63Hz
DC Input Voltage range VDC 120 - 370VDC*
Inrush Current (115 / 230VAC) A 15 / 30A 25 / 50A 30 / 60A 30 / 60A
Power Factor & Flicker - Meets EN61000-3-2, EN61000-3-3
Input Current (Rated) A 0.3A 0.8A (5V: 0.6A) 1.5A (5V: 1A) 5V: 1.5A, 12-15 V:1.7A , 24V: 2.2A
Output Voltage Accuracy % ±1% of Nominal
Line Regulation % 1%
Load Regulation % 1%
Ripple and Noise (20MHz BW) mV 50mV
Overcurrent Protection (Typ) - 110 - 160%, fold forward under short circuit (DSP100-24/C2 102-108%)
Overvoltage Protection V 120 - 145%
Hold Up Time (115VAC input) ms See Model Selector
LED Indicators - Green LED = On, Red LED = DC Output Low
Operating Temperature °C -25 to +71°C (Derate linearly 2.5%/°C from 55 to 71°C)
Temperature Coef cient %/°C ±0.02%/°C
Storage Temperature °C -25 to +85°C
Operating Humidity - 20 - 95% RH (non condensing)
Cooling - Convection
Withstand Voltage - Input to Output 3kVAC for 1 min.
Isolation Resistance - >100M at 25°C & 70%RH, Input to Output 500VDC
Vibration (Operating) IEC 60068-2-6 (Mounting by rail: Random wave, 10-500 Hz, 2G, ea. along X, Y, Z axes 10 min/cycle, 60 min)
Shock (Operating) IEC 60068-2-27 (Half sine wave, 4G, 22ms, 3 axes, 6 Faces, 3 times for each face)
Safety Agency Approvals - UL1310 Class 2
(1)
, UL508 Listed, UL60950-1, EN60950-1, CE
Immunity - EN61000-4-2, -3, -4, -5, -6, -8 & -11
Conducted & Radiated EMI - DSP10: EN55022 Class B; DSP30-100: EN55022 Class A
Weight (Typ) g 60 200 250 320
Size (WxHxD) in 0.71 x 3.58 x 2.19” 2.09 x 3.58 x 2.19” 2.8 x 3.58 x 2.19” 3.54 x 3.58 x 2.24”
Case material - Flame Retardant Polycarbonate (UL94 V-0)
Warranty yrs Three years
Speci cations
Key Market Segments & Applications
1211-800-526-2324 • www.us.tdk-lambda.com/lp/
Revision B9: Jul 2016
DSP Series
DSP10 Outline Drawing
DSP60 Outline Drawing
DSP30 Outline Drawing
DSP100 Outline Drawing
For Additional Information, please visit
us.tdk-lambda.com/lp/products/dsp-series.htm
Snap-on Mounting: snap onto DIN Rail TS35/7.5 or TS35/15.
(no tools required)
mm [inch]
14.20
9.75
43.1
91.00
32.10
49.00
55.6
18.00
91.00
12
LN
34
mm [inch]
71.00
91.00
14.20
9.75
43.1
91.00
32.10
49.00
55.6
14
56
DC LO
DC ON
DSP/DPP 10W to 480W, 5V to 48V power supplies
DLP 75W to 240W power supplies
DLP-PU Redundancy Module (20A)
R Series 3A to 30A single & three phase EMI Filters
Other DIN Rail Products
Voltage Ef ciency Hold Up Time UL1310
Model Voltage (V) Adjust (V) Current (A) Power (W) (Typ %) 115VAC in (ms) Class 2
DSP10-5 5 None 1.50 7.5 74 10 Yes
DSP30-5 5 5 - 5.5 3.00 15.0 74 25 Yes
DSP60-5 5 5 - 5.5 7.00 35.0 80 16 -
DSP10-12 12 None 0.83 10.0 78 10 Yes
DSP30-12 12 12 - 14 2.10 25.2 82 25 Yes
DSP60-12 12 12 - 14 4.50 54.0 84 16 Yes
DSP100-12 12 12 - 14 6.00 72.0 82 16 -
DSP10-15 15 None 0.67 10.1 78 60 Yes
DSP30-15 15 13.5 - 16.5 2.00 30.0 83 25 Yes
DSP60-15 15 13.5 - 16.5 4.00 60.0 85 12 Yes
DSP100-15 15 13.5 - 16.5 5.00 75.0 85 16 -
DSP10-24 24 None 0.42 10.1 80 60 Yes
DSP30-24 24 24 - 28 1.30 31.2 83 25 Yes
DSP60-24 24 24 - 28 2.50 60.0 86 12 Yes
DSP100-24/C2 24 20 - 24.2 3.80 91.2 89 10 Yes
DSP100-24 24 24 - 28 4.20 100.8 85 10 -
Model Selector
mm [inch]
53.00
91.00
14.20
9.75
43.1
91.00
32.10
49.00
55.6
1 4
56
LN
mm [inch]
91.00
32.10
49.00
56.8
14.20
9.75
43.1
91.00
89.9
1 4
56

DSP10-24

Mfr. #:
Manufacturer:
TDK-Lambda
Description:
DIN Rail Power Supplies 10W 24V 0.42A DIN Rail 115-230VAC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union