2702553

https://www.phoenixcontact.com/us/products/2702553

09/02/2016Page1/3

Antenna-FL LCX CABLE 24 E-2702553

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

The leaky wave conductor is a "wireless cable" which acts as an antenna and radiates over the entire length. The

range is limited here. Track-guided systems can thus be properly supplied even under complex conditions.

Key Commercial Data

Diameter 15.5 mm

Ambient conditions

Ambient temperature (operation) -40 °C ... 85 °C

Ambient temperature (storage/transport) -70 °C ... 85 °C

General

With connecting cable yes

Frequency range 2.4 GHz

Cable resistance 1.48 Ω/km (DC inner conductor)

2.8 Ω/km (DC phase conductor)

Gain 0 dBi

https://www.phoenixcontact.com/us/products/2702553

09/02/2016Page2/3

Antenna-FL LCX CABLE 24 E-2702553

General

60 dB, coupling attenuation 95 % (2.4 GHz)

Material Al Cu wire (inner conductors)

Copper film (Phase conductors)

PE foam (Insulation)

Assembly instructions Recommended clamp distance 0.5 m

Mounting type Wall mounting

Classifications

eCl@ss

eCl@ss 4.0 240604xx

eCl@ss 9.0 19070105

ETIM

ETIM 3.0 EC001698

ETIM 4.0 EC000416

ETIM 5.0 EC001698

UNSPSC

UNSPSC 6.01 20142601

UNSPSC 7.0901 20142601

UNSPSC 11 20142601

UNSPSC 12.01 20142601

https://www.phoenixcontact.com/us/products/2702553

09/02/2016Page3/3

Antenna-FL LCX CABLE 24 E-2702553

Special alignment tool for the accurate mounting of connectors on the leaky wave conductors.





Coaxial adapter

Connector-FL LCX CON-N-F E-2702518

The length of the leaky wave conductor must be adapted to the special length in the application. Connectors are then

installed at both cable ends. Wireless devices can be connected to these via a flexible connecting cable.





Mounting material

A termination resistor must be screwed on at the end of the leaky wave conductor which does not contain any wireless

part. It guarantees an antenna cable termination with the correct impedance and is important for every wireless

installation.





Phoenix Contact 2016 © - all rights reserved

http://www.phoenixcontact.com