SmartZone
™
Gateway EPA126
SPECIFICATION SHEET
key features and benefits
Centralized device
management
Connects up to six connected power devices, 12 environmental sensors and two access control devices into one intelligent
gateway to consolidate monitoring and management of operational data, simplify troubleshooting, and allow faster polling
of data
Single IP address Allows all connected power devices and sensors to be combined through one single gateway IP address, reducing the
need for separate IP ports, IP capital costs, and management overhead
Primary/secondary
network topology
Houses the intelligence and power supply for connected devices within the gateway itself to simplify the network
architecture and lower overall power consumption
Access and
control security
Powers access control card readers on cabinets and manages encrypted access data to support smart card technologies
and other readers that enhance data center security
Scalable design Allows Gateway EPA126 to be attached to the Gateway EPAX18 Expansion Unit to provide additional power device
inputs through the gateway’s single IP address, enabling cost-effective monitoring scalability and growth
SNMP enabled Uses open SNMP protocol to provide alerts (traps) on potential service impacting power and environmental conditions
to mitigate operational downtime
HTTP/HTTPS
web interface
Provides authentication safeguards to securely allow users to configure, monitor, and control the gateway through
remote management
SmartZone
™
Software
platform integration
Consolidates power and environmental data to be utilized by SmartZone
™
Software platforms for real-time monitoring
and display, management, and automated documentation
technical information
Model Number: Eagle-i (U-ZAEI-y)
Dimensions: 18 in. x 4.5 in. x 1.7 in. (465mm x 114mm x 44 mm)
Weight: 4.76 lbs. (2.16Kg); 6.75 lbs. (3.06Kg) packaged
Packaging: 1.98 lbs. (0.9Kg)
Mounting: 19" rack mountable, housed in a 1RU metal case
specifications
The Gateway EPA126 is installed as part of a primary/secondary topology and provides support for
up to six connected power devices, 12 environmental sensors and two access control devices all
through a single IP address. The gateway will allow for expansion of additional power devices, without
need for additional network ports, using the Gateway EPAX18 Expansion Unit that connects to the
base unit. The Gateway EPA126 consolidates all data captured from the connected power devices
and sensors and displays baseline operational data through a web interface or via SmartZone
™
Software platforms. The gateway supports keypad or card reader devices to provide cabinet access
control. The gateway supports the "open" Simple Network Management Protocol (SNMP) to allow
monitoring for conditions that warrant administrative attention via any network management system
that supports the SNMP protocol, as well as supporting HTTP/HTTPS protocols for remote
management capabilities.
www.panduit.com
applications
The SmartZone
™
Gateway EPA126 is an innovative, SNMP based gateway that simplifies the management of power devices and sensors with
one IP address, significantly reducing the number of IP addresses needed in the data center. This management information can then be displayed
via an internal web interface or utilized by SmartZone
™
Software platforms for real-time monitoring, management, and automated reporting of
operational metrics. SmartZone
™
Gateways are scalable solutions, ideally suited to brownfield or greenfield data centers and telco areas.
When coupled with the SmartZone
™
Gateway EPAX18 Expansion Unit, the number of power devices that can be monitored increases from 6 to
24, significantly improving flexibility and scalability.
The SmartZone
™
Gateway EPA126 supports up to six connected power devices, 12 environmental sensors and two access control devices. To
enhance cabinet security, the Gateway EPA126 supports keypads or HID card readers, which, when used with electronic handles, provide secure
access to the cabinet.