LT3652HVEMSE#TRPBF Datasheet LT3652HVEDD#PBF, LT3652HVEMSE#PBF, LT3652HVIDD#PBF | P22-P24

LT3652HV

3652hvfb

For more information www.linear.com/LT3652HV

3.00 ±0.10

(4 SIDES)

NOTE:

1. DRAWING IS NOT A JEDEC PACKAGE OUTLINE

2. DRAWING NOT TO SCALE

3. ALL DIMENSIONS ARE IN MILLIMETERS

4. DIMENSIONS OF EXPOSED PAD ON BOTTOM OF PACKAGE DO NOT INCLUDE

MOLD FLASH. MOLD FLASH, IF PRESENT, SHALL NOT EXCEED 0.15mm ON ANY SIDE

5. EXPOSED PAD AND TIE BARS SHALL BE SOLDER PLATED

6. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION ON THE

TOP AND BOTTOM OF PACKAGE

0.40 ±0.10

BOTTOM VIEW—EXPOSED PAD

1.65 ±0.10

0.75 ±0.05

R = 0.115

TYP

127

PIN 1

TOP MARK

(SEE NOTE 6)

0.200 REF

0.00 – 0.05

(DD12) DFN 0106 REV A

0.23 ±0.05

PIN 1 NOTCH

R = 0.20 OR

0.25 × 45°

CHAMFER

2.38 ±0.10

2.25 REF

0.45 BSC

RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS

APPLY SOLDER MASK TO AREAS THAT ARE NOT SOLDERED

0.25 ±0.05

2.25 REF

2.38 ±0.05

1.65 ±0.05

2.10 ±0.05

0.70 ±0.05

3.50 ±0.05

PACKAGE

OUTLINE

0.45 BSC

DD Package

12-Lead Plastic DFN (3mm × 3mm)

(Reference LTC DWG # 05-08-1725 Rev A)

Please refer to http://www.linear.com/product/LT3652HV#packaging for the most recent package drawings.

MSOP (MSE12) 0213 REV G

0.53 ±0.152

(.021 ±.006)

SEATING

PLANE

0.18

(.007)

1.10

(.043)

MAX

0.22 –0.38

(.009 – .015)

TYP

0.86

(.034)

REF

0.650

(.0256)

BSC

12 11 10 9 8 7

DETAIL “B”

NOTE:

1. DIMENSIONS IN MILLIMETER/(INCH)

2. DRAWING NOT TO SCALE

3. DIMENSION DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS.

MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.152mm (.006") PER SIDE

4. DIMENSION DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSIONS.

INTERLEAD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.152mm (.006") PER SIDE

5. LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING) SHALL BE 0.102mm (.004") MAX

6. EXPOSED PAD DIMENSION DOES INCLUDE MOLD FLASH. MOLD FLASH ON E-PAD SHALL

NOT EXCEED 0.254mm (.010") PER SIDE.

0.254

(.010)

0° – 6° TYP

DETAIL “A”

GAUGE PLANE

RECOMMENDED SOLDER PAD LAYOUT

BOTTOM VIEW OF

EXPOSED PAD OPTION

2.845 ±0.102

(.112 ±.004)

2.845 ±0.102

(.112 ±.004)

4.039 ±0.102

(.159 ±.004)

(NOTE 3)

1.651 ±0.102

(.065 ±.004)

1.651 ±0.102

(.065 ±.004)

0.1016 ±0.0508

(.004 ±.002)

1 2 3 4 5 6

3.00 ±0.102

(.118 ±.004)

(NOTE 4)

0.406 ±0.076

(.016 ±.003)

REF

4.90 ±0.152

(.193 ±.006)

DETAIL “B”

CORNER TAIL IS PART OF

THE LEADFRAME FEATURE.

FOR REFERENCE ONLY

NO MEASUREMENT PURPOSE

0.12 REF

0.35

REF

5.10

(.201)

MIN

3.20 – 3.45

(.126 – .136)

0.889 ±0.127

(.035 ±.005)

0.42 ±0.038

(.0165 ±.0015)

TYP

0.65

(.0256)

BSC

MSE Package

12-Lead Plastic MSOP, Exposed Die Pad

(Reference LTC DWG # 05-08-1666 Rev G)

PACKAGE DESCRIPTION

LT3652HV

3652hvfb

For more information www.linear.com/LT3652HV

Information furnished by Linear Technology Corporation is believed to be accurate and reliable.

However, no responsibilit y is assumed for its use. Linear Technology Corporation makes no representa-

tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.

REVISION HISTORY

REV DATE DESCRIPTION PAGE NUMBER

A 01/13 Added new Battery Bias Current curve 6

B 01/16 Enhanced Pin Conﬁguration

Added Note 2 to top of Electrical Characteristics

Enhanced Note 2

Changed Name of Pin 13

Modiﬁed Inductor Selection section

Modiﬁed Battery Float Voltage Programming Equations

3, 4

LT3652HV

3652hvfb

For more information www.linear.com/LT3652HV

 LINEAR TECHNOLOGY CORPORATION 2010

LT 0116 REV B • PRINTED IN USA

Linear Technology Corporation

1630 McCarthy Blvd., Milpitas, CA 95035-7417

(408) 432-1900

●

FAX: (408) 434-0507

●

www.linear.com/LT3652HV

RELATED PARTS

TYPICAL APPLICATION

1A Solar Panel Powered 3-Stage 12V Lead-Acid Fast/Float Charger; 1A Charger Fast Charges with CC/CV

Characteristics Up to 14.4V; When Charge Current Falls to 0.1A Charger Switches to 13.5V Float Charge

Mode; Charger Re-Initiates 14.4V Fast Charge Mode if Battery Voltage Falls Below 13.2V and Trickle

Charges at 0.15A if Battery Voltage is Below 10V; 0°C to 45°C Battery Temperature Charging Range

SOLAR PANEL INPUT

<40V OC VOLTAGE

16V PEAK POWER VOLTAGE

IN_REG

BOOST

SENSE

BAT

NTC

TIMER

22µH

MBRS340

309k

100k

1µF

1N4148

BZX84C6V2L

910

174k

1N41481M

SYSTEM

LOAD

WURTH

7447779122

12V LEAD

ACID BATTERY

10k

B = 3380

muRata

NCP18XH103

10µF

0.1

100µF

LT3652HV

10µF

4.7µF

SHDN

CHRG

FAULT

499k

100k

3652 TA04

MBRS140

PART NUMBER DESCRIPTION COMMENTS

LT3650-8.2/LT3650-8.4 Monolithic 2A Switch Mode 2-Cell Li-Ion

Battery Charger

Standalone, 9V ≤ V

≤ 32V (40V Absolute Maximum), 1MHz, 2A Programmable

Charge Current, Timer or C/10 Termination, Small and Few External

Components, 3mm × 3mm DFN12 Package, –8.2 for 2 × 4.1V Float Voltage

Batteries, –8.4 for 2 × 4.2V Float Voltage Batteries

LTC4001/LTC4001-1 Monolithic 2A Switch Mode Synchronous

Li-Ion Battery Charger

Standalone, 4V ≤ V

≤ 5.5V (6V Absolute Maximum, 7V Transient), 1.5MHz,

Synchronous Rectification Efficiency >90%, Adjustable Timer Termination, Small

and Few External Components, 4mm × 4mm QFN-16 Package –1 for 4.1V Float

Voltage Batteries

LTC4002 Switch Mode Lithium-Ion Battery Charger Standalone, 4.7V ≤ V

≤ 24V, 500kHz Frequency, 3 Hour Charge Termination

LTC4006 Small, High Efficiency, Fixed Voltage,

Lithium-Ion Battery Charger with

Termination and Thermistor Sensor

Complete Charger for 3- or 4-Cell Li-Ion Batteries, AC Adapter Current Limit,

16-Pin Narrow SSOP Package

LTC4007 High Efficiency, Programmable Voltage

Battery Charger with Termination

Complete Charger for 3- or 4-Cell Li-Ion Batteries, AC Adapter Current Limit,

Thermistor Sensor and Indicator Outputs

LTC4008 4A, High Efficiency, Multi-Chemistry

Battery Charger

Constant-Current/Constant-Voltage Switching Regulator Charger, Resistor

Voltage/Current Programming, AC Adapter Current Limit and Thermistor Sensor

and Indicator Outputs

LTC4012/LTC4012-1/

LTC4012-2/ LTC4012-3

4A, High Efficiency, Multi-Chemistry

Battery Charger with PowerPath™ Control

PowerPath Control, Constant-Current/Constant-Voltage Switching Regulator

Charger, Resistor Voltage/Current Programming, AC Adapter Current Limit and

Thermistor Sensor and Indicator Outputs 1 to 4 Cell Li, Up to 18 Cell Ni, SLA and

Supercap Compatible; 4mm × 4mm QFN-20 Package –1 Version for 4.1V Li Cells,

–2 Version for 4.2V Li Cells, –3 Version has Extra GND Pin

LTC4015 Multichemistry Buck Battery Charger

Controller with Digital Telemetry System

Multichemistry Li-Ion/Polymer, LiFePO

, or Lead-Acid Battery Charger with

Termination, Digital Telemetry System Monitors V

BAT

, I

BAT

, R

BAT

, NTC Ratio

(Battery Temperature), V

, I

, V

SYSTEM

, Die Temperature, Coulomb Counter and

Integrated 14-Bit ADC, Maximum Power Point Tracking, Wide Charging Input

Voltage Range: 4.5V to 35V, Wide Battery Voltage Range: Up to 35V,

5mm × 7mm QFN-38 Package

LTC4020 55V Buck-Boost Multi-Chemistry Battery

Charger

Wide Voltage Range: 4.5V to 55V Input, Up to 55V Output (60V Absolute

Maximums), Synchronous Buck-Boost DC/DC Controller, Li-Ion and Lead-Acid

Charge Algorithms, Input Voltage Regulation for High Impedance Input Supplies

and Solar Panel Peak Power Operation, Low Proﬁle (0.75mm) 38-Pin 5mm ×

7mm QFN Package

P1-P3 P4-P6 P7-P9 P10-P12 P13-P15 P16-P18 P19-P21 P22-P24

LT3652HVEMSE#TRPBF

Mfr. #:

Buy LT3652HVEMSE#TRPBF

Manufacturer:

Analog Devices / Linear Technology

Description:

Battery Management Pwr Track 2A Bat Chr

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

LT3652HVEMSE#TRPBF

LT3652HVEMSE#TRPBF

Products related to this Datasheet