LB11852FV
www.onsemi.com
13
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries
in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other
intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON
Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or
guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or
use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is
responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or
standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters,
including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its
patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support
systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for
implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall
indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or
unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an
Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
C pin
In order to connect a capacitor capable of smoothing the pin voltage to the C pin, the correlation given in the following
equation must be satisfied when f (Hz) serves as the input frequency of the CTL pin. (R is incorporated inside the IC,
and it is 180k (typ.).)
1/f = t CR
The higher the capacitance of the capacitor, the slower the response to changes in the input signals.
ORDERING INFORMATION
Device Package Shipping (Qty / Packing)
LB11852FV-TLM-H
SSOP20J (225mil)
(Pb-Free / Halogen Free)
2000 / Tape & Reel
LB11852FV-TLM-E
SSOP20J (225mil)
(Pb-Free)
2000 / Tape & Reel
LB11852FV-W-AH
SSOP20J (225mil)
(Pb-Free / Halogen Free)
2000 / Tape & Reel
† For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel
Packaging Specifications Brochure, BRD8011/D. http://www.onsemi.com/pub_link/Collateral/BRD8011-D.PDF
CTL circuit VREF circuit
5VREF
1/f = t < CR
180kΩ
CTL pin
A capacitor capable of the smoothing
pin voltage is connected here
C pin
Inverted waveform of CTL pin input
(same frequency)
